Kent · England
Telescopic bollard installation in Broadstairs
Telescopic bollards for sites across Broadstairs and the rest of Kent, from the first measurement to the last relaid paving block.
Computer-generated imageBroadstairs telescopic bollards
Telescopic bollards suit plenty of Broadstairs sites, small industrial units, local parades and high street shopfronts among them. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We cover the CT10 postcode district in Broadstairs. We also cover neighbouring Ramsgate (1.9 miles), Margate (2.9 miles), Deal (9.5 miles) and Herne Bay (13.6 miles) — distances are straight-line.
Key facts for this area
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Thanet
- Postcodes
- CT10
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
Broadstairs: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Telescopic bollards in Broadstairs: common uses
Common uses in a place like Broadstairs:
- Allocated parking bays in flats and private developments
- Sites with no power for automatic bollards
- Shared drives that need occasional closing
What we check first in Broadstairs
In Broadstairs, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Broadstairs is listed or inside a conservation area, check with the local planning authority (the council for Thanet) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- If the drive is shared, agree positions and keys with the other users first.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Options to consider
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What affects the quote
Our South East guide prices are a starting point; the survey in Broadstairs firms them up. What tends to move them:
- Excavation depth and the presence of services under the drive
- Drainage: simple soakaway or a connection to a drain
- Stainless or powder-coated finish
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Lubricate the lock with a suitable spray, especially before winter.
If posts in Broadstairs are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Broadstairs: FAQs
Do you install telescopic bollards in Broadstairs?
We cover all of Broadstairs (CT10) and the rest of Kent. We also work in Ramsgate, Margate and Deal.
Do I need consent for telescopic bollards on a public footway in Broadstairs?
In Broadstairs, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do telescopic bollards cost in Broadstairs?
In Broadstairs, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.