Kent · England
Concrete bollard installation in Broadstairs
Local installation of concrete bollards in Broadstairs — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageBroadstairs concrete bollards
Concrete bollards suit plenty of Broadstairs sites, community car parks, local parades and schools among them. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
We cover every part of Broadstairs in the CT10 postcode district. We also cover neighbouring Ramsgate (1.9 miles), Margate (2.9 miles), Deal (9.5 miles) and Herne Bay (13.6 miles) — distances are straight-line.
Local details
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Thanet
- Postcodes
- CT10
- Guide price
- Typically £185–£635 per bollard + VAT; minimum job £625
- Survey
- Free, with a fixed written quote
Concrete bollard prices in Broadstairs
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£375 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£505 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £455–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Concrete bollards in Broadstairs: common uses
Typical reasons Broadstairs sites choose concrete bollards:
- Retail parks and landscaped car parks
- School, library and civic building forecourts
- Park entrances and greens where vehicles should not drive
What we check first in Broadstairs
Kent County Council is the highway authority covering Broadstairs's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Broadstairs need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Thanet before posts go in.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Because concrete bollards are heavy, a weak foundation shows itself quickly as a tilt.
- Do not present untested concrete bollards as crash-rated protection.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
How the job runs
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Protect while the grout cures
Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.
Specification choices
| Option | Detail |
|---|---|
| Precast concrete | Grey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option. |
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
What affects the quote
Our South East guide prices are a starting point; the survey in Broadstairs firms them up. What tends to move them:
- Precast concrete or reconstituted stone
- Lifting equipment and access for delivery
- Foundation depth and ground conditions
After installation
Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing. Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean.
If posts in Broadstairs are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install concrete bollards in Broadstairs?
We cover all of Broadstairs (CT10) and the rest of Kent. We also work in Ramsgate, Margate and Deal.
Do I need consent for concrete bollards on a public footway in Broadstairs?
The highway authority for local roads in Broadstairs is Kent County Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for concrete bollards in Broadstairs?
In Broadstairs, typically £185–£635 per bollard, supplied and installed, plus VAT, with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Are concrete bollards anti-ram?
Only if that specific product has been crash-tested. Weight alone does not make a bollard crash-rated, and an untested concrete post can crack or shear when hit hard. Tested concrete-clad products exist for security use.