Kent · England
Bollard removal in Broadstairs
Planning bollard removal jobs in Broadstairs? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBroadstairs bollard removal jobs
Across Broadstairs, typical sites for bollard removal jobs include local parades, schools and small industrial units. Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match.
Coverage in Broadstairs takes in the CT10 postcode district. Nearby, we also work in Ramsgate (1.9 miles), Margate (2.9 miles), Deal (9.5 miles) and Herne Bay (13.6 miles), measured as the crow flies.
Broadstairs at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Thanet
- Postcodes
- CT10
- Guide price
- Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
- Survey
- Free, with a fixed written quote
Typical bollard removal jobs requests in Broadstairs
Typical reasons for bollard removal jobs in Broadstairs:
- Moving bollards to new positions on the same site
- Decommissioning automatic bollards that are no longer used
- Clearing old bollards before resurfacing
Bollard removal prices in Broadstairs
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £85–£205 + VAT · £95–£245 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£285 + VAT · £195–£335 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £255–£365 + VAT · £305–£435 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Broadstairs
The highway authority for local roads in Broadstairs is Kent County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Broadstairs need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Thanet before posts go in.
Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface. Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
How the job runs
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Specification choices
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
Pricing bollard removal jobs in Broadstairs
When we price bollard removal jobs in Broadstairs, these make the biggest difference:
- Electrical isolation and hydraulic drain-down
- Cutting off or full foundation extraction
- Number and type of bollards
Keeping them working
After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
If posts in Broadstairs are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you carry out bollard removal jobs in Broadstairs?
We cover all of Broadstairs (CT10) and the rest of Kent. We also work in Ramsgate, Margate and Deal.
Who gives permission for bollards on the pavement in Broadstairs?
In Broadstairs, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for bollard removal jobs in Broadstairs?
In Broadstairs, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.