Kent · England
Flexible bollard installation in Broadstairs
Local installation of flexible bollards in Broadstairs — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageBroadstairs flexible bollards
Flexible bollards suit plenty of Broadstairs sites, local parades, schools and community buildings among them. Flexible bollards are traffic management products, not barriers, and will not stop a vehicle that is driven at them.
We cover the CT10 postcode district in Broadstairs. We also cover neighbouring Ramsgate (1.9 miles), Margate (2.9 miles), Deal (9.5 miles) and Herne Bay (13.6 miles) — distances are straight-line.
Local details
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Thanet
- Postcodes
- CT10
- Guide price
- Typically £205–£635 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
Broadstairs: typical flexible bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£385 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £335–£515 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £465–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
Typical flexible bollards jobs in Broadstairs
Around Broadstairs, flexible bollards usually solve one of these:
- Drive-thru lanes and fuel forecourts
- Marking pedestrian routes inside multi-storey car parks
- Depot and yard routes where vehicles knock posts daily
Consents, ground and services in Broadstairs
The highway authority for local roads in Broadstairs is Kent County Council; motorways and trunk roads sit with National Highways. Flexible bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Broadstairs need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Thanet before posts go in.
Multi-storey and rooftop decks are a special case: slabs may be post-tensioned or carry waterproofing and heating, so drilling depth and positions are agreed with the building owner and scanned first. Anchors therefore need sound concrete with enough edge distance; anchoring into thin, cracked or weak surfaces means the base works loose within weeks.
- Keep pedestrian gaps and routes clear, referring to Inclusive Mobility guidance where people walk through the line.
- Do not use flexible bollards where a physical barrier is needed to protect people or buildings; they guide rather than stop.
From survey to handover
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Check the surface
Slabs and decks are checked for thickness, reinforcement and waterproofing before drilling. Weak tarmac may need a concrete pad or socket base.
Set out the line
Posts are set out to guide vehicles along the intended path, with spacing that reads as a line to drivers.
Choosing the right spec
| Option | Detail |
|---|---|
| Colours and reflective sleeves | Yellow, black, red, white or orange, with reflective sleeves for visibility in low light. |
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
Pricing flexible bollards in Broadstairs
Our South East guide prices are a starting point; the survey in Broadstairs firms them up. What tends to move them:
- Number of posts and length of line
- Out-of-hours working in busy car parks
- Deck scanning and restrictions on drilling
Looking after them
Check flexible bollards for splits, permanent bends and loose bases, and tighten or replace fixings that have worked loose. After resurfacing or line repainting, check that the bases were not disturbed or painted over, and that posts still line up with the new markings.
We can also service, repair or replace existing posts anywhere in Broadstairs.
Common questions
Which parts of Broadstairs do you cover for flexible bollards?
We cover all of Broadstairs (CT10) and the rest of Kent. We also work in Ramsgate, Margate and Deal.
Do I need consent for flexible bollards on a public footway in Broadstairs?
Kent County Council is the highway authority covering Broadstairs's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for flexible bollards in Broadstairs?
In Broadstairs, typically £205–£635 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Do flexible bollards work in cold weather?
They do, but polymers become stiffer in cold conditions and recover more slowly after a knock. Sprung-base designs are less affected. Neither type is damaged by normal UK winter temperatures.
How many times can a flexible bollard be hit?
Many times in normal use, as long as the impacts are the low-speed bumps it is designed for. A heavy vehicle running right over it, or a high-speed strike, can tear it. Manufacturers give guidance for their products.