Kent · England
Bollard replacement in Broadstairs
Replacement bollards for sites across Broadstairs and the rest of Kent, from the first measurement to the last relaid paving block.
Computer-generated imageAbout replacement bollards in Broadstairs
In the town of Broadstairs, replacement bollards tend to go in at schools, filling-station forecourts and community buildings. Replacement is the right answer when a post is too damaged to repair or no longer suits how the site is used.
We cover every part of Broadstairs in the CT10 postcode district. Nearby, we also work in Ramsgate (1.9 miles), Margate (2.9 miles), Deal (9.5 miles) and Herne Bay (13.6 miles), measured as the crow flies.
Broadstairs at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Thanet
- Postcodes
- CT10
- Guide price
- Typically £225–£1,245 per post + VAT (£265–£1,495 inc VAT for homes); minimum job £465
- Survey
- Free, with a fixed written quote
What replacement bollards cost in Broadstairs
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £225–£665 + VAT · £265–£795 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£975 + VAT · £635–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,245 + VAT · £1,045–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; +6% for South East. Guide only — the fixed price follows a survey.
Typical replacement bollards requests in Broadstairs
What replacement bollards usually sort out in Broadstairs:
- Posts bent, sheared or broken by vehicle impacts
- Corroded steel posts at the end of their life
- Crushed sockets and failed telescopic cassettes
Before we dig in Broadstairs
The highway authority for local roads in Broadstairs is Kent County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Broadstairs is listed or inside a conservation area, check with the local planning authority (the council for Thanet) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
If the old foundation is cracked from the impact, it is removed entirely; if it is sound and suits the new post, reuse can reduce disruption. Reinstatement matches the surrounding surface, though weathered paving and older tarmac may leave a visible patch.
- On public highway, the highway authority may need to approve the replacement or carry out the work itself.
- Keep gaps and visibility bands in line with Inclusive Mobility guidance when replacing posts on pedestrian routes.
How the job runs
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Remove the old bollard
The damaged post is cut or extracted and the old foundation broken out, checking for services as the hole is opened.
Hand over records
Photographs and an itemised invoice are provided, which is useful when recovering the cost from a driver's insurer.
Specification choices
| Option | Detail |
|---|---|
| Heavier section | Larger diameter, thicker wall or concrete-filled steel where posts keep getting bent. |
| Matched finishes | RAL powder coat, stainless grade and finish, or heritage paint schemes matched to the existing line. |
| Making safe | Removing or capping a dangerous broken stub before the replacement is fitted. |
What affects the quote
Our South East guide prices are a starting point; the survey in Broadstairs firms them up. What tends to move them:
- Surface type and reinstatement
- Upgrades that need larger foundations
- Number of posts and the product chosen
Looking after them
A single impact on a rarely struck post is bad luck; repeated strikes in the same spot point to a layout problem, such as a tight turn or a missing wheel stop, that a stronger bollard alone will not solve. After replacement, look at why the post failed.
We can also service, repair or replace existing posts anywhere in Broadstairs.
Bollard replacement in Broadstairs: FAQs
Do you carry out replacement bollards in Broadstairs?
We cover all of Broadstairs (CT10) and the rest of Kent. We also work in Ramsgate, Margate and Deal.
Who gives permission for bollards on the pavement in Broadstairs?
In Broadstairs, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for replacement bollards in Broadstairs?
In Broadstairs, typically £225–£1,245 per post replaced, old post and footing removed, plus VAT (£265–£1,495 including VAT for homeowners), with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can you replace just one bollard in a line?
Yes. We measure and match the existing posts so the new one sits in line at the same height and finish. If the original product is no longer made, we show you a close equivalent first.
Can you provide paperwork for an insurance claim?
Yes. The written quote, photographs and itemised invoice are usually what an insurer asks for when recovering the cost from the driver responsible. We can provide them in the format your insurer needs.