Leicestershire · England
Ram-raid protection bollards in Melton Mowbray
Ram-raid bollards supplied and fitted in Melton Mowbray, Leicestershire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRam-raid bollards in Melton Mowbray
Across Melton Mowbray, typical sites for ram-raid bollards include community car parks, small industrial units and filling-station forecourts. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across LE13 and LE14 — Melton Mowbray itself and places including Asfordby, Old Dalby, Stathern and Waltham on the Wolds. Nearby, we also work in Oakham (9.4 miles), Loughborough (13.1 miles), Leicester (13.5 miles) and Oadby (13.8 miles), measured as the crow flies. It sits roughly 14 miles from Leicester as the crow flies.
Key facts for this area
- Area
- Leicestershire, England
- Highway authority
- Leicestershire County Council (local roads)
- Planning authority
- the council for Melton
- Postcodes
- LE13 and LE14
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £925
- Survey
- Free, with a fixed written quote
- Nearby
- Oakham (9.4 mi), Loughborough (13.1 mi), Leicester (13.5 mi), Oadby (13.8 mi)
Ram-raid bollards in Melton Mowbray: common uses
Typical reasons Melton Mowbray sites choose ram-raid bollards:
- Convenience stores and off-licences with glazed frontages
- Pharmacies and late-opening premises
- Premises that have already been targeted once
Ram-raid bollard prices in Melton Mowbray
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £715–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Before we dig in Melton Mowbray
Leicestershire County Council is the highway authority covering Melton Mowbray's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Melton) first — we flag this at survey.
Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
What happens on site
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Options to consider
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
What moves the price in Melton Mowbray
Our East Midlands guide prices are a starting point; the survey in Melton Mowbray firms them up. What tends to move them:
- Removable positions and their locks
- Out-of-hours working to avoid closing the shop
- Unrated, PAS 170-1 or crash-rated product
Looking after them
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
For damaged or loose posts in Melton Mowbray, repairs and replacements are priced in writing first.
Common questions
Can you install ram-raid bollards anywhere in Melton Mowbray?
We cover all of Melton Mowbray (LE13 and LE14) and the rest of Leicestershire. We also work in Oakham, Loughborough and Leicester.
Do I need consent for ram-raid bollards on a public footway in Melton Mowbray?
Leicestershire County Council is the highway authority covering Melton Mowbray's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do ram-raid bollards cost in Melton Mowbray?
In Melton Mowbray, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Ram-raid bollards in nearby towns
- Oakham (9.4 mi)
- Loughborough (13.1 mi)
- Leicester (13.5 mi)
- Oadby (13.8 mi)
- Grantham (14.3 mi)
- West Bridgford (15.1 mi)