Bollard Installers

Leicestershire · England

Ram-raid protection bollards in Oadby

Local installation of ram-raid bollards in Oadby — free survey, fixed written price, and posts set to the right spacing for people and vehicles.

Stainless steel bollards protecting the glazed front of a convenience store on a terraced street at nightComputer-generated image

Ram-raid bollards in Oadby

Ram-raid bollards suit plenty of Oadby sites, schools, town-centre squares and small industrial units among them. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.

Coverage in Oadby takes in the LE18 postcode district. Jobs in Oadby can be combined with work in Wigston (1.8 miles), Leicester (3 miles), Market Harborough (11.2 miles) and Loughborough (12.1 miles) (straight-line distances). Oadby is about 3 miles from Leicester.

Key facts for this area

Area
Leicestershire, England
Highway authority
Leicestershire County Council (local roads)
Planning authority
the council for Oadby and Wigston
Postcodes
LE18
Guide price
Typically £385–£1,445 per bollard + VAT; minimum job £925
Survey
Free, with a fixed written quote
Nearby
Wigston (1.8 mi), Leicester (3 mi), Market Harborough (11.2 mi), Loughborough (12.1 mi)

What Oadby sites use ram-raid bollards for

Common uses in a place like Oadby:

  • Premises that have already been targeted once
  • Filling station kiosks and forecourt shops
  • Through-the-wall and freestanding ATMs

Ram-raid bollard prices in Oadby

SpecificationGuide priceIncludes
Standard£385–£835 + VATStandard post, foundation, reinstatement
Upgraded£715–£1,145 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£1,045–£1,445 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.

Permissions and groundwork in Oadby

Leicestershire County Council is the highway authority covering Oadby's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

Many private-land installations in Oadby need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Oadby and Wigston before posts go in.

Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.

  • Ask your landlord, and check any lease restrictions on alterations to the frontage.
  • Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.

Installation, step by step

Arrange consents

If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.

Excavate and set the posts

Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.

Reinstate the pavement

Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.

Choosing the right spec

OptionDetail
PAS 170-1 tested bollardsTested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested.
Reflective and contrasting bandsBands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement.
Stainless or decorative coversCovers over steel cores for shopping streets and branded frontages where plain steel would look out of place.

What moves the price in Oadby

Our East Midlands guide prices are a starting point; the survey in Oadby firms them up. What tends to move them:

  • Removable positions and their locks
  • Unrated, PAS 170-1 or crash-rated product
  • Foundation depth and what is found under the pavement

Looking after them

If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Ram-raid bollards are robust but not maintenance-free.

If posts in Oadby are later hit or damaged, we can repair or replace them — see bollard repairs.

Common questions

Which parts of Oadby do you cover for ram-raid bollards?

We cover all of Oadby (LE18) and the rest of Leicestershire. We also work in Wigston, Leicester and Market Harborough.

Do I need consent for ram-raid bollards on a public footway in Oadby?

The highway authority for local roads in Oadby is Leicestershire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

How much do ram-raid bollards cost in Oadby?

In Oadby, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.

How many bollards does a shopfront need?

Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.

Can bollards go on the pavement outside my shop?

Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.

Ram-raid bollards in nearby towns

Other bollard services in Oadby

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote