Northamptonshire · England
Ram-raid protection bollards in Corby
Ram-raid bollards for sites across Corby and the rest of Northamptonshire, from the first measurement to the last relaid paving block.
Computer-generated imageAbout ram-raid bollards in Corby
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Corby, that tends to mean sites such as community car parks, high street shopfronts and town-centre squares.
Coverage in Corby takes in the NN17 and NN18 postcode districts and nearby places like Weldon. We also cover neighbouring Kettering (6.9 miles), Market Harborough (9.8 miles), Oakham (11.9 miles) and Wellingborough (13.4 miles) — distances are straight-line. Northampton is around 19 miles away.
Key facts for this area
- Area
- Northamptonshire, England
- Highway authority
- North Northamptonshire Council (local roads)
- Planning authority
- North Northamptonshire Council
- Postcodes
- NN17 and NN18
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £925
- Survey
- Free, with a fixed written quote
- Nearby
- Kettering (6.9 mi), Market Harborough (9.8 mi), Oakham (11.9 mi), Wellingborough (13.4 mi)
Ram-raid bollards in Corby: common uses
Typical reasons Corby sites choose ram-raid bollards:
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Filling station kiosks and forecourt shops
- Convenience stores and off-licences with glazed frontages
Guide prices for Corby
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £715–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Consents, ground and services in Corby
In Corby, work on adopted pavements and verges needs consent from North Northamptonshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Northamptonshire Council) first — we flag this at survey.
Deep foundations need care near the building's own footings and basement walls. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
How the job runs
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Options to consider
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
Pricing ram-raid bollards in Corby
When we price ram-raid bollards in Corby, these make the biggest difference:
- Removable positions and their locks
- Number of posts across the frontage or ATM
- Foundation depth and what is found under the pavement
Keeping them working
Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight. Ram-raid bollards are robust but not maintenance-free.
For damaged or loose posts in Corby, repairs and replacements are priced in writing first.
Common questions
Which parts of Corby do you cover for ram-raid bollards?
We cover all of Corby (NN17 and NN18) and the rest of Northamptonshire. We also work in Kettering, Market Harborough and Oakham.
Who gives permission for bollards on the pavement in Corby?
The highway authority for local roads in Corby is North Northamptonshire Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for ram-raid bollards in Corby?
In Corby, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards in nearby towns
- Kettering (6.9 mi)
- Market Harborough (9.8 mi)
- Oakham (11.9 mi)
- Wellingborough (13.4 mi)
- Stamford (13.7 mi)
- Rushden (14.8 mi)