West Sussex · England
Ram-raid protection bollards in Chichester
Planning ram-raid bollards in Chichester? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout ram-raid bollards in Chichester
From filling-station forecourts, small industrial units and community car parks, Chichester has plenty of places where ram-raid bollards earn their keep. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Chichester's PO19, PO18 and PO20 postcode districts, including places such as Fishbourne, Bosham, Westhampnett and Nutbourne. Nearby, we also work in Bognor Regis (5.8 miles), Havant (9.1 miles), Littlehampton (10.6 miles) and Waterlooville (11.3 miles), measured as the crow flies. Portsmouth is around 14 miles away.
Key facts for this area
- Area
- West Sussex, England
- Highway authority
- West Sussex County Council (local roads)
- Planning authority
- the council for Chichester
- Postcodes
- PO19, PO18 and PO20
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
- Nearby
- Bognor Regis (5.8 mi), Havant (9.1 mi), Littlehampton (10.6 mi), Waterlooville (11.3 mi)
Chichester: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Ram-raid bollards in Chichester: common uses
Around Chichester, ram-raid bollards usually solve one of these:
- Filling station kiosks and forecourt shops
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Through-the-wall and freestanding ATMs
Consents, ground and services in Chichester
West Sussex County Council is the highway authority covering Chichester's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Chichester) first — we flag this at survey.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
Installation, step by step
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
Pricing ram-raid bollards in Chichester
Two Chichester jobs with the same number of posts can price quite differently. The usual reasons:
- Removable positions and their locks
- Unrated, PAS 170-1 or crash-rated product
- Number of posts across the frontage or ATM
Looking after them
Ram-raid bollards are robust but not maintenance-free. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
We can also service, repair or replace existing posts anywhere in Chichester.
Questions about ram-raid bollards in Chichester
Which parts of Chichester do you cover for ram-raid bollards?
We cover all of Chichester (PO19, PO18 and PO20) and the rest of West Sussex. We also work in Bognor Regis, Havant and Littlehampton.
Who gives permission for bollards on the pavement in Chichester?
In Chichester, work on adopted pavements and verges needs consent from West Sussex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do ram-raid bollards cost in Chichester?
In Chichester, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards near Chichester
- Bognor Regis (5.8 mi)
- Havant (9.1 mi)
- Littlehampton (10.6 mi)
- Waterlooville (11.3 mi)
- Portsmouth (13.8 mi)
- Gosport (15.5 mi)