Wales · 2 towns
Ram-raid protection bollards in Wrexham
Ram-raid bollards for sites across Wrexham: surveyed, quoted in writing and installed by our crews.
Computer-generated imageRam-raid bollards in Wrexham
Across Wrexham, typical sites for ram-raid bollards include community car parks, filling-station forecourts and small industrial units. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Highway authorities for local roads in Wrexham: Wrexham County Borough Council.
Choose your town in Wrexham
Guide prices in Wrexham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Wrexham
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Wrexham | Wrexham County Borough Council | Wrexham County Borough Council |
| Coedpoeth | Wrexham County Borough Council | Wrexham County Borough Council |
Rules for ram-raid bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Ram-raid bollards in Wrexham: FAQs
Do you cover all of Wrexham for ram-raid bollards?
Yes — including Wrexham and Coedpoeth. Enter your postcode in the price calculator to confirm.
How much do ram-raid bollards cost in Wrexham?
In Wrexham, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Wrexham?
For local roads, Wrexham County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.