Isle of Anglesey · Wales
Removable bollard installation in Holyhead
Removable bollards supplied and fitted in Holyhead, Isle of Anglesey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRemovable bollards in Holyhead
Removable bollards suit plenty of Holyhead sites, small industrial units, local parades and high street shopfronts among them. Removable bollards are used where vehicles need occasional rather than daily access.
Coverage in Holyhead takes in the LL65 postcode district and nearby places like Trearddur, Bodedern, Bryngwran and Llanfihangel yn Nhowyn. Holyhead is fairly self-contained, with no other large town within about 20 miles.
Key facts for this area
- Area
- Isle of Anglesey, Wales
- Highway authority
- Isle of Anglesey County Council (local roads)
- Planning authority
- Isle of Anglesey County Council
- Postcodes
- LL65
- Guide price
- Typically £235–£815 per bollard + VAT (£275–£975 inc VAT for homes); minimum job £575
- Survey
- Free, with a fixed written quote
Holyhead: typical removable bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £235–£485 + VAT · £275–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £415–£655 + VAT · £495–£785 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £585–£815 + VAT · £695–£975 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Where removable bollards go in around Holyhead
Common uses in a place like Holyhead:
- Driveways and private parking bays
- Maintenance tracks through parks and open spaces
- Gaps in a fixed bollard line that must open occasionally
Consents, ground and services in Holyhead
Before digging near the kerb in Holyhead we establish who owns the ground: adopted footways are Isle of Anglesey County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Holyhead is listed or inside a conservation area, check with the local planning authority (Isle of Anglesey County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly. The critical details are level and drainage.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
What happens on site
Agree who will lift the post
At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Finishes and options
| Option | Detail |
|---|---|
| Steel, stainless or aluminium posts | Galvanised and powder-coated steel for robustness, stainless for appearance, aluminium where lightness matters for frequent lifting. |
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
What moves the price in Holyhead
Our Wales guide prices are a starting point; the survey in Holyhead firms them up. What tends to move them:
- Lock type and whether locks are keyed alike
- Post material: steel, stainless or aluminium
- Rated removable posts where security is required
Looking after them
If a socket has worked loose in the surface, re-bed it before the lid edge becomes a trip hazard. Check the lid springs and hinges.
For damaged or loose posts in Holyhead, repairs and replacements are priced in writing first.
Common questions
Can you install removable bollards anywhere in Holyhead?
We cover all of Holyhead (LL65) and the rest of Isle of Anglesey.
Who gives permission for bollards on the pavement in Holyhead?
In Holyhead the highway authority for local roads is Isle of Anglesey County Council. We confirm whether the ground is adopted highway before quoting, because removable bollards on a public footway need its agreement first.
How much do removable bollards cost in Holyhead?
In Holyhead, typically £235–£815 per bollard with ground socket, supplied and installed, plus VAT (£275–£975 including VAT for homeowners), with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.
Where do we keep the post when it is removed?
Somewhere it cannot become a trip hazard or be taken. A wall-mounted storage bracket or a locked store nearby works well. Leaving posts lying on the ground is how they get damaged or lost.