Argyll and Bute · Scotland
Semi-automatic bollard installation in Dunoon
Planning semi-automatic bollards in Dunoon? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageDunoon semi-automatic bollards
We supply and fit semi-automatic bollards throughout Dunoon, typically for sites such as schools, community buildings and local parades. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.
Coverage in Dunoon takes in the PA23 postcode district and nearby places like Sandbank, Innellan, Kilmun and Blairmore. There are no other towns of Dunoon's size close by, so crews travel in specifically for jobs here.
Local details
- Area
- Argyll and Bute, Scotland
- Roads authority
- Argyll and Bute Council (local roads)
- Planning authority
- Argyll and Bute Council
- Postcodes
- PA23
- Guide price
- Typically £1,095–£3,495 per bollard + VAT (£1,295–£4,195 inc VAT for homes); minimum job £1,195
- Survey
- Free, with a fixed written quote
Typical semi-automatic bollards jobs in Dunoon
Around Dunoon, semi-automatic bollards usually solve one of these:
- Private roads and courtyards with a small number of key holders
- Driveways where the owner wants minimal effort
- Locations where automatic bollards are not justified
Semi-automatic bollard prices in Dunoon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,095–£2,095 + VAT · £1,295–£2,495 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,795–£2,845 + VAT · £2,145–£3,395 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,545–£3,495 + VAT · £3,045–£4,195 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Dunoon
For anything on the public footway in Dunoon we check with the roads authority first — Argyll and Bute Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Many private-land installations in Dunoon need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Argyll and Bute Council before posts go in.
Buried services across the entrance are traced and the position adjusted if needed, as the cassette cannot simply be made shallower. Reinstatement around the collar has to be firm, because the post is pushed down by foot and any movement in the surround soon shows as cracking.
- Warn users and passers-by that the post rises on its own; fit reflective bands and consider a sign at busy sites.
- Check land ownership; bollards on public highway need the roads authority's agreement.
What happens on site
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Options to consider
| Option | Detail |
|---|---|
| Head lighting | Some models include battery or solar LEDs in the head to improve visibility on unlit sites. |
| Duty level | Light-duty domestic models and heavier commercial versions with stronger cassettes and posts. |
| Height and diameter | Raised heights commonly around 500–900 mm and diameters around 100–200 mm, depending on model and duty. |
What moves the price in Dunoon
Our Scotland guide prices are a starting point; the survey in Dunoon firms them up. What tends to move them:
- Excavation depth and services in the way
- Finish and any head lighting
- Number of posts and keyed-alike locks
After installation
If several posts on one site were installed at the same time, their struts tend to wear at a similar rate, so it can make sense to replace them together. Do not try to dismantle the strut assembly without the right procedure, as it holds stored energy.
We can also service, repair or replace existing posts anywhere in Dunoon.
Questions about semi-automatic bollards in Dunoon
Which parts of Dunoon do you cover for semi-automatic bollards?
We cover all of Dunoon (PA23) and the rest of Argyll and Bute.
Do I need consent for semi-automatic bollards on a public footway in Dunoon?
For anything on the public footway in Dunoon we check with the roads authority first — Argyll and Bute Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for semi-automatic bollards in Dunoon?
In Dunoon, typically £1,095–£3,495 per bollard, supplied and installed, plus VAT (£1,295–£4,195 including VAT for homeowners), with a minimum job of £1,195 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Is it hard to push the bollard back down?
Not usually; most users press it down with a hand or foot. The strut resists, so it needs a steady push rather than a sharp kick. Heavier commercial models take more effort than domestic ones.
What makes a semi-automatic bollard rise without power?
A gas strut or spring inside the cassette. Pushing the post down compresses it and a latch holds the post below ground. Turning the key releases the latch and the stored energy lifts the post.