Argyll and Bute · Scotland
Telescopic bollard installation in Dunoon
Telescopic bollards supplied and fitted in Dunoon, Argyll and Bute: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout telescopic bollards in Dunoon
Telescopic bollards suit plenty of Dunoon sites, high street shopfronts, residential driveways and filling-station forecourts among them. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across PA23 — Dunoon itself and places including Sandbank, Innellan, Kilmun and Blairmore. Dunoon is fairly self-contained, with no other large town within about 20 miles.
Key facts for this area
- Area
- Argyll and Bute, Scotland
- Roads authority
- Argyll and Bute Council (local roads)
- Planning authority
- Argyll and Bute Council
- Postcodes
- PA23
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
Typical telescopic bollards jobs in Dunoon
Typical reasons Dunoon sites choose telescopic bollards:
- Sites with no power for automatic bollards
- Allocated parking bays in flats and private developments
- Commercial yards where posts must not be left lying around
What telescopic bollards cost in Dunoon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Dunoon
In Scotland the council is the roads authority for local roads, which in Dunoon means Argyll and Bute Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Argyll and Bute Council can confirm before anything is ordered.
Positions are scanned and hand-dug before committing. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- If the drive is shared, agree positions and keys with the other users first.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Choosing the right spec
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Dunoon firms them up. What tends to move them:
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
- Surface type and quality of reinstatement
Keeping them working
Lubricate the lock with a suitable spray, especially before winter. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
For damaged or loose posts in Dunoon, repairs and replacements are priced in writing first.
Common questions
Do you install telescopic bollards in Dunoon?
We cover all of Dunoon (PA23) and the rest of Argyll and Bute.
Who gives permission for bollards on the pavement in Dunoon?
For anything on the public footway in Dunoon we check with the roads authority first — Argyll and Bute Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for telescopic bollards in Dunoon?
In Dunoon, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.