Wales · 3 towns
Shallow-mount security bollard installation in Conwy
Shallow-mount bollards for sites across Conwy: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in Conwy
Across Conwy, typical sites for shallow-mount bollards include high street shopfronts, schools and filling-station forecourts. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Highway authorities for local roads in Conwy: Conwy County Borough Council.
Choose your town in Conwy
Guide prices in Conwy
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,795 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,845 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £5,995–£8,745 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Conwy
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Colwyn Bay | Conwy County Borough Council | Conwy County Borough Council |
| Llandudno | Conwy County Borough Council | Conwy County Borough Council |
| Abergele | Conwy County Borough Council | Conwy County Borough Council |
Rules for shallow-mount bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Shallow-mount bollards in Conwy: FAQs
Do you cover all of Conwy for shallow-mount bollards?
Yes — including Colwyn Bay, Llandudno and Abergele. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in Conwy?
In Conwy, typically £1,945–£8,745 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,845 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Conwy?
For local roads, Conwy County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.