Bollard Installers

Devon · England

Shallow-mount security bollard installation in Barnstaple

Local installation of shallow-mount bollards in Barnstaple — free survey, fixed written price, and posts set to the right spacing for people and vehicles.

Line of dark grey security bollards on a pedestrianised high street with stone paving and a utility access cover beside themComputer-generated image

Barnstaple shallow-mount bollards

Across Barnstaple, typical sites for shallow-mount bollards include filling-station forecourts, small industrial units and schools. Like any rated product, its performance applies only to the configuration and foundation that were tested.

Coverage in Barnstaple takes in the EX31, EX32 and EX33 postcode districts and nearby places like Fremington, Yelland, Bickington and Chivenor. Nearby, we also work in Bideford (7.9 miles), measured as the crow flies.

Key facts for this area

Area
Devon, England
Highway authority
Devon County Council (local roads)
Planning authority
the council for North Devon
Postcodes
EX31, EX32 and EX33
Guide price
Typically £1,995–£8,995 per bollard + VAT; minimum job £4,995
Survey
Free, with a fixed written quote
Nearby
Bideford (7.9 mi)

What shallow-mount bollards cost in Barnstaple

SpecificationGuide priceIncludes
Standard£1,995–£4,945 + VATRated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation
Upgraded£4,095–£7,045 + VATRated for 7.5 t at 40 mph (64 km/h), tested foundation
Premium£6,195–£8,995 + VATRated for 7.5 t at 50 mph (80 km/h), or a specialist foundation

Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.

What Barnstaple sites use shallow-mount bollards for

Typical reasons Barnstaple sites choose shallow-mount bollards:

  • Lines that must cross over shallow drainage or ducts
  • Sites where service diversions would be slow or impractical
  • Bridges and structures where excavation depth is limited

Before we dig in Barnstaple

Devon County Council is the highway authority covering Barnstaple's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for North Devon) first — we flag this at survey.

Shallow does not mean simple. The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first.

  • Record the frame's position on as-built drawings so future excavation near the line can be planned safely.
  • Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.

Installation, step by step

Map what is underground

Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.

Confirm the system with the manufacturer

The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.

Assemble and level the frame

Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.

Options to consider

OptionDetail
Surface-mounted rated unitsSome tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on.
Rated planters and street furnitureBenches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place.
Modular cassette sectionsPre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits.

What moves the price in Barnstaple

When we price shallow-mount bollards in Barnstaple, these make the biggest difference:

  • Changes of direction, end details and removable positions
  • Restricted working hours in busy streets or occupied sites
  • Lifting, storing and relaying natural stone paving

Keeping them working

Any later utility work beside the line should be supervised so the frame is not undermined. Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands.

For damaged or loose posts in Barnstaple, repairs and replacements are priced in writing first.

Shallow-mount bollards in Barnstaple: FAQs

Which parts of Barnstaple do you cover for shallow-mount bollards?

We cover all of Barnstaple (EX31, EX32 and EX33) and the rest of Devon. We also work in Bideford.

Who gives permission for bollards on the pavement in Barnstaple?

Devon County Council is the highway authority covering Barnstaple's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

What's a typical price for shallow-mount bollards in Barnstaple?

In Barnstaple, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.

How much shallower is a shallow-mount bollard foundation?

Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.

Can I install a single shallow-mount bollard on its own?

Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.

Shallow-mount bollards in nearby towns

Other bollard services in Barnstaple

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote