Lancashire · England
Shallow-mount security bollard installation in Preston
Shallow-mount bollards for sites across Preston and the rest of Lancashire, from the first measurement to the last relaid paving block.
Computer-generated imagePreston shallow-mount bollards
We supply and fit shallow-mount bollards throughout Preston, typically for sites such as city-centre plazas, university campuses and pedestrianised streets. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
We work across PR1 and PR2 — Preston itself and places including Fulwood, Grimsargh, Cow Hill and Haighton Green. Jobs in Preston can be combined with work in Leyland (4.5 miles), Chorley (8.6 miles), Blackburn (9.1 miles) and Darwen (10.8 miles) (straight-line distances). Preston is about 27 miles from Liverpool.
Local details
- Area
- Lancashire, England
- Highway authority
- Lancashire County Council (local roads)
- Planning authority
- the council for Preston
- Postcodes
- PR1 and PR2
- Guide price
- Typically £1,945–£8,795 per bollard + VAT; minimum job £4,895
- Survey
- Free, with a fixed written quote
Guide prices for Preston
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,845 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,895 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,095–£8,795 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Where shallow-mount bollards go in around Preston
Typical reasons Preston sites choose shallow-mount bollards:
- Podium decks, car park roofs and basement slabs
- Retrofits outside occupied buildings with tight programmes
- Bridges and structures where excavation depth is limited
What we check first in Preston
Lancashire County Council is the highway authority covering Preston's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Preston need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Preston before posts go in.
On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail. Shallow does not mean simple.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
From survey to handover
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Specification choices
| Option | Detail |
|---|---|
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
Pricing shallow-mount bollards in Preston
Two Preston jobs with the same number of posts can price quite differently. The usual reasons:
- Amount of hand digging needed around live services
- Restricted working hours in busy streets or occupied sites
- Changes of direction, end details and removable positions
After installation
Any later utility work beside the line should be supervised so the frame is not undermined. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
For damaged or loose posts in Preston, repairs and replacements are priced in writing first.
Questions about shallow-mount bollards in Preston
Which parts of Preston do you cover for shallow-mount bollards?
We cover all of Preston (PR1 and PR2) and the rest of Lancashire. We also work in Leyland, Chorley and Blackburn.
Do I need consent for shallow-mount bollards on a public footway in Preston?
The highway authority for local roads in Preston is Lancashire County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for shallow-mount bollards in Preston?
In Preston, typically £1,945–£8,795 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,895 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
Shallow-mount bollards near Preston
- Leyland (4.5 mi)
- Chorley (8.6 mi)
- Blackburn (9.1 mi)
- Darwen (10.8 mi)
- Lytham St Annes (12 mi)
- Accrington (14.1 mi)