London · England
Shallow-mount security bollard installation in Ealing
Shallow-mount bollards for sites across Ealing and the rest of London, from the first measurement to the last relaid paving block.
Computer-generated imageEaling shallow-mount bollards
From shopping parades, hospital approaches and estate car parks, Ealing has plenty of places where shallow-mount bollards earn their keep. Like any rated product, its performance applies only to the configuration and foundation that were tested.
Coverage in Ealing takes in the W13, W5, W7, UB6, W3 and UB1 postcode districts and nearby places like Southall, Greenford and Northolt. Nearby, we also work in Brent (3.1 miles), Hammersmith and Fulham (4 miles), Harrow (5 miles) and Hounslow (5.1 miles), measured as the crow flies.
Key facts for this area
- Area
- London, England
- Highway authority
- Ealing Council (local roads)
- Planning authority
- Ealing Council
- Postcodes
- W13, W5, W7, UB6, W3, UB1, UB5 and UB2
- Guide price
- Typically £2,295–£10,395 per bollard + VAT; minimum job £5,745
- Survey
- Free, with a fixed written quote
- Nearby
- Brent (3.1 mi), Hammersmith and Fulham (4 mi), Harrow (5 mi), Hounslow (5.1 mi)
Guide prices for Ealing
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,295–£5,695 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,695–£8,095 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £7,145–£10,395 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Where shallow-mount bollards go in around Ealing
Around Ealing, shallow-mount bollards usually solve one of these:
- Footways with dense utility runs just below the surface
- Lines that must cross over shallow drainage or ducts
- Retrofits outside occupied buildings with tight programmes
Permissions and groundwork in Ealing
In Ealing, work on adopted pavements and verges needs consent from Ealing Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
If your site in Ealing is listed or inside a conservation area, check with the local planning authority (Ealing Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail. Paving is often natural stone in the streets where these systems are used, so careful lifting, storage and relaying is part of the job.
- Agree works and separation distances with utility owners, and with the highway authority where the line is on public highway.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
Installation, step by step
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Finishes and options
| Option | Detail |
|---|---|
| Removable posts within a run | Some systems include removable or retractable positions for maintenance or emergency access. Check how these affect the rating. |
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
Pricing shallow-mount bollards in Ealing
Two Ealing jobs with the same number of posts can price quite differently. The usual reasons:
- Restricted working hours in busy streets or occupied sites
- Changes of direction, end details and removable positions
- Structural engineering checks on slabs or decks
Looking after them
Any later utility work beside the line should be supervised so the frame is not undermined. Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands.
For damaged or loose posts in Ealing, repairs and replacements are priced in writing first.
Common questions
Which parts of Ealing do you cover for shallow-mount bollards?
We cover all of Ealing (W13, W5, W7, UB6, W3 and UB1) and the rest of London. We also work in Brent, Hammersmith and Fulham and Harrow.
Do I need consent for shallow-mount bollards on a public footway in Ealing?
Ealing Council is the highway authority covering Ealing's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do shallow-mount bollards cost in Ealing?
In Ealing, typically £2,295–£10,395 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,745 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
Shallow-mount bollards in nearby towns
- Brent (3.1 mi)
- Hammersmith and Fulham (4 mi)
- Harrow (5 mi)
- Hounslow (5.1 mi)
- Kensington and Chelsea (5.1 mi)
- Hillingdon (5.9 mi)