Northern Ireland · 3 towns
Shallow-mount security bollard installation in Mid and East Antrim
Shallow-mount bollards for sites across Mid and East Antrim: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in Mid and East Antrim
Across Mid and East Antrim, typical sites for shallow-mount bollards include filling-station forecourts, high street shopfronts and small industrial units. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Across Northern Ireland, DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways; councils handle planning.
Choose your town in Mid and East Antrim
Guide prices in Mid and East Antrim
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,845 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,895 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,095–£8,795 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -2% for Northern Ireland. Guide only — the fixed price follows a survey.
Highway and planning authorities in Mid and East Antrim
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Carrickfergus | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
| Ballymena | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
| Larne | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
Rules for shallow-mount bollards in Northern Ireland
Bollards on public footways and roads need DfI Roads consent under the Roads (NI) Order 1993; councils deal with planning. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Northern Ireland.
How installation works
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Shallow-mount bollards in Mid and East Antrim: FAQs
Do you cover all of Mid and East Antrim for shallow-mount bollards?
Yes — including Carrickfergus, Ballymena and Larne. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in Mid and East Antrim?
In Mid and East Antrim, typically £1,945–£8,795 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,895 plus VAT, using our Northern Ireland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Mid and East Antrim?
DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways throughout Northern Ireland; councils handle planning.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.