Northern Ireland · 3 towns
Automatic rising bollard installation in Mid and East Antrim
Automatic bollards for sites across Mid and East Antrim: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Mid and East Antrim
Across Mid and East Antrim, typical sites for automatic bollards include small industrial units, town-centre squares and filling-station forecourts. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Across Northern Ireland, DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways; councils handle planning.
Choose your town in Mid and East Antrim
Guide prices in Mid and East Antrim
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,945–£7,895 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,445–£11,395 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £9,995–£14,695 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; -2% for Northern Ireland. Guide only — the fixed price follows a survey.
Local authorities across Mid and East Antrim
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Carrickfergus | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
| Ballymena | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
| Larne | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
Rules for automatic bollards in Northern Ireland
Bollards on public footways and roads need DfI Roads consent under the Roads (NI) Order 1993; councils deal with planning. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Northern Ireland.
How installation works
Survey and risk assessment
A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Automatic bollards in Mid and East Antrim: FAQs
Do you cover all of Mid and East Antrim for automatic bollards?
Yes — including Carrickfergus, Ballymena and Larne. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Mid and East Antrim?
In Mid and East Antrim, typically £2,945–£14,695 per bollard, installed with controls, loops and commissioning, plus VAT, using our Northern Ireland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Mid and East Antrim?
DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways throughout Northern Ireland; councils handle planning.
Why do automatic bollards need drainage?
The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.
Should I choose hydraulic or electro-mechanical bollards?
Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.