West Midlands · England
Shallow-mount security bollard installation in Shirley
Shallow-mount bollards for sites across Shirley and the rest of West Midlands, from the first measurement to the last relaid paving block.
Computer-generated imageShallow-mount bollards in Shirley
Shallow-mount bollards suit plenty of Shirley sites, small industrial units, filling-station forecourts and community car parks among them. Like any rated product, its performance applies only to the configuration and foundation that were tested.
We work across B90 — Shirley itself and places including Dickens Heath, Cheswick Green, Tidbury Green and Major's Green. Nearby, we also work in Solihull (1.6 miles), Birmingham (5.9 miles), Smethwick (8.4 miles) and Redditch (9 miles), measured as the crow flies. Shirley is about 6 miles from Birmingham.
Key facts for this area
- Area
- West Midlands, England
- Highway authority
- Solihull Council (local roads)
- Planning authority
- Solihull Council
- Postcodes
- B90
- Guide price
- Typically £1,995–£8,995 per bollard + VAT; minimum job £4,995
- Survey
- Free, with a fixed written quote
- Nearby
- Solihull (1.6 mi), Birmingham (5.9 mi), Smethwick (8.4 mi), Redditch (9 mi)
Shirley: typical shallow-mount bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical shallow-mount bollards jobs in Shirley
Around Shirley, shallow-mount bollards usually solve one of these:
- Footways with dense utility runs just below the surface
- Lines that must cross over shallow drainage or ducts
- Retrofits outside occupied buildings with tight programmes
Permissions and groundwork in Shirley
In Shirley, work on adopted pavements and verges needs consent from Solihull Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Solihull Council) first — we flag this at survey.
Shallow does not mean simple. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Agree works and separation distances with utility owners, and with the highway authority where the line is on public highway.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
From survey to handover
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Options to consider
| Option | Detail |
|---|---|
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
Pricing shallow-mount bollards in Shirley
Our West Midlands guide prices are a starting point; the survey in Shirley firms them up. What tends to move them:
- Lifting, storing and relaying natural stone paving
- Amount of hand digging needed around live services
- Changes of direction, end details and removable positions
Looking after them
Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
If posts in Shirley are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install shallow-mount bollards anywhere in Shirley?
We cover all of Shirley (B90) and the rest of West Midlands. We also work in Solihull, Birmingham and Smethwick.
Do I need consent for shallow-mount bollards on a public footway in Shirley?
In Shirley, work on adopted pavements and verges needs consent from Solihull Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for shallow-mount bollards in Shirley?
In Shirley, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.
Shallow-mount bollards near Shirley
- Solihull (1.6 mi)
- Birmingham (5.9 mi)
- Smethwick (8.4 mi)
- Redditch (9 mi)
- Halesowen (10 mi)
- West Bromwich (10.5 mi)