Tyne and Wear · England
Stainless steel bollards and covers in Felling
Planning stainless steel bollards in Felling? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageStainless steel bollards in Felling
Stainless steel bollards suit plenty of Felling sites, schools, small industrial units and filling-station forecourts among them. Stainless steel bollards and sleeve covers in 304 or 316 grade, for building entrances, plazas and upgrading tired steel posts.
We work across NE10 — Felling itself and places including Follingsby. We also cover neighbouring Gateshead (1.4 miles), Newcastle upon Tyne (2.2 miles), Hebburn (2.6 miles) and Wallsend (3 miles) — distances are straight-line.
Felling at a glance
- Area
- Tyne and Wear, England
- Highway authority
- Gateshead Council (local roads)
- Planning authority
- Gateshead Council
- Postcodes
- NE10
- Guide price
- Typically £285–£1,145 per bollard + VAT (£335–£1,345 inc VAT for homes); minimum job £665
- Survey
- Free, with a fixed written quote
- Nearby
- Gateshead (1.4 mi), Newcastle upon Tyne (2.2 mi), Hebburn (2.6 mi), Wallsend (3 mi)
Guide prices for Felling
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £285–£645 + VAT · £335–£765 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £545–£905 + VAT · £645–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £805–£1,145 + VAT · £965–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Typical stainless steel bollards jobs in Felling
Common uses in a place like Felling:
- Sleeving existing painted steel posts that have become tatty
- Coastal and poolside sites where paint finishes fail
- Office, hotel and hospital entrances
Consents, ground and services in Felling
The highway authority for local roads in Felling is Gateshead Council; motorways and trunk roads sit with National Highways. Stainless steel bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Felling need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Gateshead Council before posts go in.
Stainless can be stained by iron particles from cutting discs, drills and steel tools used nearby, and those particles rust on the surface within days. Paving around new posts is cut before the posts arrive, or the posts are protected while it happens.
- Keep clear gaps of typically at least 1,000–1,200 mm on pedestrian routes, in line with Inclusive Mobility guidance.
- On crash-rated bollards, confirm with the manufacturer that the cover is approved for the tested product.
What happens on site
Prepare the cores
For covers, existing posts are checked for straightness, loose foundations and corrosion. Cores that lean or move are re-bedded first, because a cover will not hide a failing post for long.
Install new posts
New solid stainless posts are set in concrete, bolted down or fitted into sockets, with care taken not to scratch the finish or contaminate it with carbon steel tools.
Fit covers
Sleeves are slid over the cores, packed so they cannot rattle, and fixed with concealed fixings. A gap or drainage detail at the base stops water being trapped inside.
Choosing the right spec
| Option | Detail |
|---|---|
| Grade 304 or 316 | 304 for most inland locations; 316 near the coast, swimming pools, or roads and car parks salted heavily in winter. |
| Contrasting bands | Dark or reflective bands so posts stand out against pale paving, which bare stainless often does not. |
| Brushed or polished finish | Satin brushed finishes hide fingerprints and light scratches; mirror polish is striking but shows every mark. |
What affects the quote
Our North East guide prices are a starting point; the survey in Felling firms them up. What tends to move them:
- Surface reinstatement and protection of the finish during works
- Manufacturer-approved covers for rated bollards
- Condition of existing cores and any re-bedding needed
Keeping them working
Light tea staining can be removed with a stainless cleaner and a non-scratch pad, working with the grain of a brushed finish. Avoid wire wool and steel brushes, which leave particles that rust.
We can also service, repair or replace existing posts anywhere in Felling.
Questions about stainless steel bollards in Felling
Which parts of Felling do you cover for stainless steel bollards?
We cover all of Felling (NE10) and the rest of Tyne and Wear. We also work in Gateshead, Newcastle upon Tyne and Hebburn.
Who gives permission for bollards on the pavement in Felling?
The highway authority for local roads in Felling is Gateshead Council; motorways and trunk roads sit with National Highways. Stainless steel bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for stainless steel bollards in Felling?
In Felling, typically £285–£1,145 per bollard, supplied and installed, plus VAT (£335–£1,345 including VAT for homeowners), with a minimum job of £665 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Are stainless bollards stronger than steel ones?
Not necessarily. Stainless tube is often thinner-walled, so strength depends on wall thickness, infill and fixing. Many stainless posts get their strength from a concrete fill or a steel core inside.
Do stainless covers affect a crash rating?
They can if they are not part of the tested product. Use covers supplied or approved by the bollard manufacturer. We fit approved covers and leave the core and foundation exactly as installed.
Stainless steel bollards in nearby towns
- Gateshead (1.4 mi)
- Newcastle upon Tyne (2.2 mi)
- Hebburn (2.6 mi)
- Wallsend (3 mi)
- Jarrow (3.9 mi)
- Washington (4.3 mi)