London · England
Steel security bollard installation in City of London
Local installation of steel security bollards in City of London — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout steel security bollards in City of London
Steel security bollards suit plenty of City of London sites, hospital approaches, office entrances and places of worship among them. Concrete-filled steel bollards, root-fixed or base-plated, for car parks, forecourts, boundaries and nuisance vehicle control.
We cover every part of City of London in the EC2V, EC2R, EC2Y, EC4N, EC4M and EC4V postcode districts. We also cover neighbouring Islington (2.2 miles), Tower Hamlets (2.5 miles), Westminster (2.6 miles) and Hackney (3 miles) — distances are straight-line.
Local details
- Area
- London, England
- Highway authority
- the City of London Corporation (local roads)
- Planning authority
- The City of London Corporation
- Postcodes
- EC2V, EC2R, EC2Y, EC4N, EC4M, EC4V, EC2M and EC4R
- Guide price
- Typically £225–£1,045 per bollard + VAT (£265–£1,245 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Islington (2.2 mi), Tower Hamlets (2.5 mi), Westminster (2.6 mi), Hackney (3 mi)
Where steel security bollards go in around City of London
Common uses in a place like City of London:
- Lines between pedestrian routes and service yards
- Protecting meter boxes, gas kiosks, pillars and corners
- Social housing estates with nuisance parking
City of London: typical steel security bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £225–£565 + VAT · £265–£675 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £465–£805 + VAT · £555–£965 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £705–£1,045 + VAT · £845–£1,245 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Consents, ground and services in City of London
In City of London, work on adopted pavements and verges needs consent from the City of London Corporation, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
If your site in City of London is listed or inside a conservation area, check with the local planning authority (The City of London Corporation) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Root-fixed posts need firm ground and enough depth to carry the post's root plus a concrete surround. Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
- Check whether the land is public highway or adopted verge before installing; the highway authority's agreement is usually needed.
Installation, step by step
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Options to consider
| Option | Detail |
|---|---|
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
| Finishes | Hot-dip galvanised, then powder-coated in a RAL colour if wanted. Black, grey, yellow and green are common. |
| Root-fixed | Cast into a concrete foundation, typically with several hundred millimetres of post below ground. The usual choice where digging is possible. |
What affects the quote
Two City of London jobs with the same number of posts can price quite differently. The usual reasons:
- Finish: galvanised only or powder-coated
- Ground conditions and buried services
- Root-fixed or base-plated installation
Looking after them
Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather. Reflective bands fade and peel and are easy to renew.
If posts in City of London are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about steel security bollards in City of London
Which parts of City of London do you cover for steel security bollards?
We cover all of City of London (EC2V, EC2R, EC2Y, EC4N, EC4M and EC4V) and the rest of London. We also work in Islington, Tower Hamlets and Westminster.
Do I need consent for steel security bollards on a public footway in City of London?
In City of London, work on adopted pavements and verges needs consent from the City of London Corporation, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
How much do steel security bollards cost in City of London?
In City of London, typically £225–£1,045 per bollard, supplied and installed, plus VAT (£265–£1,245 including VAT for homeowners), with a minimum job of £675 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Are unrated steel bollards anti-ram?
No. They have not been crash-tested, so their performance against a deliberate vehicle attack is unknown. They are suited to nuisance parking and low-speed knocks; tested products are needed where an attack is the concern.
Should I choose root-fixed or base-plated steel bollards?
Root-fixed where you can dig and want the stronger post; base-plated where there is a sound slab and you want quick installation or the option to remove posts later. Base plates are limited by the slab and anchors, so they are not the right choice where vehicles hit hard.
Steel security bollards near City of London
- Islington (2.2 mi)
- Tower Hamlets (2.5 mi)
- Westminster (2.6 mi)
- Hackney (3 mi)
- Camden (3.5 mi)
- Southwark (3.7 mi)