Renfrewshire · Scotland
Steel security bollard installation in Johnstone
Local installation of steel security bollards in Johnstone — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout steel security bollards in Johnstone
From small industrial units, schools and community car parks, Johnstone has plenty of places where steel security bollards earn their keep. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
We cover Johnstone's PA5, PA10, PA9, PA6, PA11 and PA12 postcode districts, including places such as Elderslie, Brookfield, Kilbarchan and Howwood. Nearby, we also work in Paisley (3.2 miles), Barrhead (5.2 miles), Erskine (5.6 miles) and Renfrew (5.6 miles), measured as the crow flies. Glasgow is around 10 miles away.
Johnstone at a glance
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA5, PA10, PA9, PA6, PA11 and PA12
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
Johnstone: typical steel security bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where steel security bollards go in around Johnstone
Typical reasons Johnstone sites choose steel security bollards:
- Lines between pedestrian routes and service yards
- Social housing estates with nuisance parking
- Forecourts and building entrances needing a visible boundary
Permissions and groundwork in Johnstone
In Scotland the council is the roads authority for local roads, which in Johnstone means Renfrewshire Council. Steel security bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Johnstone is listed or inside a conservation area, check with the local planning authority (Renfrewshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches the surface, whether tarmac, block paving, flags or turf. Base plates must sit on a slab thick and sound enough to hold resin anchors; cracked or thin concrete will let the anchors pull out on the first knock.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
What happens on site
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Options to consider
| Option | Detail |
|---|---|
| Concrete infill | Adds mass and stiffness and makes the post harder to cut or dent. Usually specified for security and impact positions. |
| Base-plated | Bolted to a sound concrete slab with resin anchors. Quick to fit and easy to remove later, suited to light-duty and indoor use. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
Pricing steel security bollards in Johnstone
Our Scotland guide prices are a starting point; the survey in Johnstone firms them up. What tends to move them:
- Root-fixed or base-plated installation
- Tube diameter, wall thickness and concrete infill
- Finish: galvanised only or powder-coated
After installation
Check periodically for impact damage, loose base plates and cracked surfacing around the root. Reflective bands fade and peel and are easy to renew.
If posts in Johnstone are later hit or damaged, we can repair or replace them — see bollard repairs.
Steel security bollards in Johnstone: FAQs
Which parts of Johnstone do you cover for steel security bollards?
We cover all of Johnstone (PA5, PA10, PA9, PA6, PA11 and PA12) and the rest of Renfrewshire. We also work in Paisley, Barrhead and Erskine.
Do I need consent for steel security bollards on a public footway in Johnstone?
In Scotland the council is the roads authority for local roads, which in Johnstone means Renfrewshire Council. Steel security bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
How much do steel security bollards cost in Johnstone?
In Johnstone, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Why fill a steel bollard with concrete?
Concrete infill adds weight and stiffness, so the post dents less and is harder to cut. It also stops water collecting inside a hollow tube. It is usual for security and impact positions.
Are unrated steel bollards anti-ram?
No. They have not been crash-tested, so their performance against a deliberate vehicle attack is unknown. They are suited to nuisance parking and low-speed knocks; tested products are needed where an attack is the concern.
Steel security bollards near Johnstone
- Paisley (3.2 mi)
- Barrhead (5.2 mi)
- Erskine (5.6 mi)
- Renfrew (5.6 mi)
- Clydebank (6.6 mi)
- Newton Mearns (8.1 mi)