Buckinghamshire · England
Telescopic bollard installation in High Wycombe
Local installation of telescopic bollards in High Wycombe — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout telescopic bollards in High Wycombe
From retail parks, leisure centres and high streets, High Wycombe has plenty of places where telescopic bollards earn their keep. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across HP11, HP13, HP12, HP10, HP15 and SL8 — High Wycombe itself and places including Loudwater, Downley, Flackwell Heath and Wooburn Green. We also cover neighbouring Amersham (6.3 miles), Maidenhead (7.5 miles), Chesham (8.1 miles) and Chalfont St Peter (8.4 miles) — distances are straight-line. It sits roughly 15 miles from Reading as the crow flies.
Local details
- Area
- Buckinghamshire, England
- Highway authority
- Buckinghamshire Council (local roads)
- Planning authority
- Buckinghamshire Council
- Postcodes
- HP11, HP13, HP12, HP10, HP15, SL8, SL7 and HP14
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Amersham (6.3 mi), Maidenhead (7.5 mi), Chesham (8.1 mi), Chalfont St Peter (8.4 mi)
Where telescopic bollards go in around High Wycombe
Typical reasons High Wycombe sites choose telescopic bollards:
- Domestic driveways where the bollard is used daily
- Car parks where a removable post would go missing
- Access roads closed outside working hours
What telescopic bollards cost in High Wycombe
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in High Wycombe
In High Wycombe, work on adopted pavements and verges needs consent from Buckinghamshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in High Wycombe is listed or inside a conservation area, check with the local planning authority (Buckinghamshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Positions are scanned and hand-dug before committing. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Specification choices
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
Pricing telescopic bollards in High Wycombe
Our South East guide prices are a starting point; the survey in High Wycombe firms them up. What tends to move them:
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
- Surface type and quality of reinstatement
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
If posts in High Wycombe are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about telescopic bollards in High Wycombe
Which parts of High Wycombe do you cover for telescopic bollards?
We cover all of High Wycombe (HP11, HP13, HP12, HP10, HP15 and SL8) and the rest of Buckinghamshire. We also work in Amersham, Maidenhead and Chesham.
Do I need consent for telescopic bollards on a public footway in High Wycombe?
The highway authority for local roads in High Wycombe is Buckinghamshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do telescopic bollards cost in High Wycombe?
In High Wycombe, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Telescopic bollards near High Wycombe
- Amersham (6.3 mi)
- Maidenhead (7.5 mi)
- Chesham (8.1 mi)
- Chalfont St Peter (8.4 mi)
- Gerrards Cross (8.8 mi)
- Slough (10.6 mi)