Cambridgeshire · England
Telescopic bollard installation in Ely
Telescopic bollards supplied and fitted in Ely, Cambridgeshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageEly telescopic bollards
We supply and fit telescopic bollards throughout Ely, typically for sites such as community car parks, local parades and residential driveways. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover Ely's CB6 and CB7 postcode districts, including places such as Littleport, Witchford, Little Downham and Stretham. We also cover neighbouring Newmarket (12.3 miles), March (12.8 miles), Cambridge (15.1 miles) and Wisbech (18.9 miles) — distances are straight-line.
Local details
- Area
- Cambridgeshire, England
- Highway authority
- Cambridgeshire County Council (local roads)
- Planning authority
- the council for East Cambridgeshire
- Postcodes
- CB6 and CB7
- Guide price
- Typically £355–£1,245 per bollard + VAT (£425–£1,495 inc VAT for homes); minimum job £655
- Survey
- Free, with a fixed written quote
Typical telescopic bollards jobs in Ely
Common uses in a place like Ely:
- Domestic driveways where the bollard is used daily
- Commercial yards where posts must not be left lying around
- Shared drives that need occasional closing
Telescopic bollard prices in Ely
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £355–£725 + VAT · £425–£865 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £615–£985 + VAT · £735–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £885–£1,245 + VAT · £1,045–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Permissions and groundwork in Ely
The highway authority for local roads in Ely is Cambridgeshire County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for East Cambridgeshire) first — we flag this at survey.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Positions are scanned and hand-dug before committing.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What moves the price in Ely
When we price telescopic bollards in Ely, these make the biggest difference:
- Drainage: simple soakaway or a connection to a drain
- Excavation depth and the presence of services under the drive
- Surface type and quality of reinstatement
After installation
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
If posts in Ely are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Ely: FAQs
Can you install telescopic bollards anywhere in Ely?
We cover all of Ely (CB6 and CB7) and the rest of Cambridgeshire. We also work in Newmarket, March and Cambridge.
Do I need consent for telescopic bollards on a public footway in Ely?
Cambridgeshire County Council is the highway authority covering Ely's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Ely?
In Ely, typically £355–£1,245 per bollard with cassette, supplied and installed, plus VAT (£425–£1,495 including VAT for homeowners), with a minimum job of £655 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Telescopic bollards near Ely
- Newmarket (12.3 mi)
- March (12.8 mi)
- Cambridge (15.1 mi)
- Wisbech (18.9 mi)
- Huntingdon (19.5 mi)
- Thetford (20.6 mi)