Flintshire · Wales
Telescopic bollard installation in Mold
Local installation of telescopic bollards in Mold — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout telescopic bollards in Mold
We supply and fit telescopic bollards throughout Mold, typically for sites such as community car parks, local parades and residential driveways. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Mold takes in the CH7 postcode district and nearby places like Mynydd Isa, Northop Hall, Drury and Treuddyn. We also cover neighbouring Deeside (4.9 miles), Flint (5.4 miles), Coedpoeth (8.5 miles) and Wrexham (10.4 miles) — distances are straight-line.
Key facts for this area
- Area
- Flintshire, Wales
- Highway authority
- Flintshire County Council (local roads)
- Planning authority
- Flintshire County Council
- Postcodes
- CH7
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
Telescopic bollards in Mold: common uses
Around Mold, telescopic bollards usually solve one of these:
- Allocated parking bays in flats and private developments
- Commercial yards where posts must not be left lying around
- Domestic driveways where the bollard is used daily
Telescopic bollard prices in Mold
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Permissions and groundwork in Mold
Before digging near the kerb in Mold we establish who owns the ground: adopted footways are Flintshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Mold is listed or inside a conservation area, check with the local planning authority (Flintshire County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Positions are scanned and hand-dug before committing. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- If the drive is shared, agree positions and keys with the other users first.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Options to consider
| Option | Detail |
|---|---|
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
Pricing telescopic bollards in Mold
When we price telescopic bollards in Mold, these make the biggest difference:
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
- Drainage: simple soakaway or a connection to a drain
Keeping them working
Lubricate the lock with a suitable spray, especially before winter. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
For damaged or loose posts in Mold, repairs and replacements are priced in writing first.
Common questions
Which parts of Mold do you cover for telescopic bollards?
We cover all of Mold (CH7) and the rest of Flintshire. We also work in Deeside, Flint and Coedpoeth.
Do I need consent for telescopic bollards on a public footway in Mold?
Before digging near the kerb in Mold we establish who owns the ground: adopted footways are Flintshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
How much do telescopic bollards cost in Mold?
In Mold, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.