Highland · Scotland
Telescopic bollard installation in Inverness
Telescopic bollards supplied and fitted in Inverness, Highland: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageInverness telescopic bollards
Across Inverness, typical sites for telescopic bollards include filling-station forecourts, residential driveways and small industrial units. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We work across IV1, IV3, IV2 and IV8 — Inverness itself and places including North Kessock, Leachkin, Cradlehall and Ardersier. There are no other towns of Inverness's size close by, so crews travel in specifically for jobs here.
Key facts for this area
- Area
- Highland, Scotland
- Roads authority
- The Highland Council (local roads)
- Planning authority
- The Highland Council
- Postcodes
- IV1, IV3, IV2 and IV8
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
Inverness: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where telescopic bollards go in around Inverness
Common uses in a place like Inverness:
- Car parks where a removable post would go missing
- Sites with no power for automatic bollards
- Commercial yards where posts must not be left lying around
Permissions and groundwork in Inverness
Inverness falls under The Highland Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
Many private-land installations in Inverness need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at The Highland Council before posts go in.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
From survey to handover
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
What affects the quote
When we price telescopic bollards in Inverness, these make the biggest difference:
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Inverness.
Questions about telescopic bollards in Inverness
Do you install telescopic bollards in Inverness?
We cover all of Inverness (IV1, IV3, IV2 and IV8) and the rest of Highland.
Who gives permission for bollards on the pavement in Inverness?
Inverness falls under The Highland Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for telescopic bollards in Inverness?
In Inverness, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.