Somerset · England
Telescopic bollard installation in Yeovil
Planning telescopic bollards in Yeovil? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout telescopic bollards in Yeovil
Across Yeovil, typical sites for telescopic bollards include schools, small industrial units and local parades. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across BA20, BA21, BA22, TA15 and TA14 — Yeovil itself and places including Mudford Sock, Mudford, Coppits Hill and Lower Vagg. Nearby, we also work in Bridgwater (20.7 miles) and Taunton (21.1 miles), measured as the crow flies. It sits roughly 36 miles from Bristol as the crow flies.
Yeovil at a glance
- Area
- Somerset, England
- Highway authority
- Somerset Council (local roads)
- Planning authority
- Somerset Council
- Postcodes
- BA20, BA21, BA22, TA15 and TA14
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Bridgwater (20.7 mi), Taunton (21.1 mi)
Guide prices for Yeovil
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Telescopic bollards in Yeovil: common uses
Typical reasons Yeovil sites choose telescopic bollards:
- Domestic driveways where the bollard is used daily
- Commercial yards where posts must not be left lying around
- Shared drives that need occasional closing
What we check first in Yeovil
The highway authority for local roads in Yeovil is Somerset Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Yeovil is listed or inside a conservation area, check with the local planning authority (Somerset Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
Installation, step by step
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Options to consider
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
What moves the price in Yeovil
When we price telescopic bollards in Yeovil, these make the biggest difference:
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
Keeping them working
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
We can also service, repair or replace existing posts anywhere in Yeovil.
Common questions
Which parts of Yeovil do you cover for telescopic bollards?
We cover all of Yeovil (BA20, BA21, BA22, TA15 and TA14) and the rest of Somerset. We also work in Bridgwater and Taunton.
Do I need consent for telescopic bollards on a public footway in Yeovil?
Somerset Council is the highway authority covering Yeovil's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Yeovil?
In Yeovil, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.