Surrey · England
Telescopic bollard installation in Horley
Telescopic bollards supplied and fitted in Horley, Surrey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout telescopic bollards in Horley
Whether it's local parades, small industrial units and community car parks, telescopic bollards in Horley are planned around who needs to get through and who doesn't. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Horley takes in the RH6 postcode district. We also cover neighbouring Crawley (4.4 miles), Redhill (4.6 miles), Reigate (4.8 miles) and East Grinstead (7.5 miles) — distances are straight-line. Horley is about 24 miles from Brighton.
Local details
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Reigate and Banstead
- Postcodes
- RH6
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Crawley (4.4 mi), Redhill (4.6 mi), Reigate (4.8 mi), East Grinstead (7.5 mi)
Where telescopic bollards go in around Horley
Around Horley, telescopic bollards usually solve one of these:
- Sites with no power for automatic bollards
- Car parks where a removable post would go missing
- Access roads closed outside working hours
What telescopic bollards cost in Horley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Horley
Surrey County Council is the highway authority covering Horley's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Reigate and Banstead) first — we flag this at survey.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Positions are scanned and hand-dug before committing.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
- If the drive is shared, agree positions and keys with the other users first.
Installation, step by step
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Specification choices
| Option | Detail |
|---|---|
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
Pricing telescopic bollards in Horley
Our South East guide prices are a starting point; the survey in Horley firms them up. What tends to move them:
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
- Surface type and quality of reinstatement
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
We can also service, repair or replace existing posts anywhere in Horley.
Common questions
Which parts of Horley do you cover for telescopic bollards?
We cover all of Horley (RH6) and the rest of Surrey. We also work in Crawley, Redhill and Reigate.
Do I need consent for telescopic bollards on a public footway in Horley?
Surrey County Council is the highway authority covering Horley's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do telescopic bollards cost in Horley?
In Horley, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Telescopic bollards near Horley
- Crawley (4.4 mi)
- Redhill (4.6 mi)
- Reigate (4.8 mi)
- East Grinstead (7.5 mi)
- Caterham (8.2 mi)
- Banstead (10.4 mi)