Surrey · England
Telescopic bollard installation in Reigate
Telescopic bollards supplied and fitted in Reigate, Surrey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout telescopic bollards in Reigate
In the town of Reigate, telescopic bollards tend to go in at small industrial units, community car parks and local parades. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across RH2 — Reigate itself and places including Nalderswood and Sidlow. Jobs in Reigate can be combined with work in Redhill (1.5 miles), Horley (4.8 miles), Banstead (5.9 miles) and Caterham (6.3 miles) (straight-line distances). Reigate is about 28 miles from Brighton.
Local details
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Reigate and Banstead
- Postcodes
- RH2
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
What Reigate sites use telescopic bollards for
Around Reigate, telescopic bollards usually solve one of these:
- Access roads closed outside working hours
- Car parks where a removable post would go missing
- Commercial yards where posts must not be left lying around
What telescopic bollards cost in Reigate
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Reigate
The highway authority for local roads in Reigate is Surrey County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Reigate need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Reigate and Banstead before posts go in.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Specification choices
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What affects the quote
Our South East guide prices are a starting point; the survey in Reigate firms them up. What tends to move them:
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
- Drainage: simple soakaway or a connection to a drain
Looking after them
Lubricate the lock with a suitable spray, especially before winter. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
If posts in Reigate are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about telescopic bollards in Reigate
Which parts of Reigate do you cover for telescopic bollards?
We cover all of Reigate (RH2) and the rest of Surrey. We also work in Redhill, Horley and Banstead.
Do I need consent for telescopic bollards on a public footway in Reigate?
In Reigate, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do telescopic bollards cost in Reigate?
In Reigate, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.