Surrey · England
Timber bollard installation in Horley
Timber bollards for sites across Horley and the rest of Surrey, from the first measurement to the last relaid paving block.
Computer-generated imageAbout timber bollards in Horley
Across Horley, typical sites for timber bollards include community car parks, local parades and small industrial units. Timber bollards deter and guide vehicles; they are not tested barriers.
We cover every part of Horley in the RH6 postcode district. We also cover neighbouring Crawley (4.4 miles), Redhill (4.6 miles), Reigate (4.8 miles) and East Grinstead (7.5 miles) — distances are straight-line. Horley is about 24 miles from Brighton.
Key facts for this area
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Reigate and Banstead
- Postcodes
- RH6
- Guide price
- Typically £105–£365 per post + VAT (£125–£435 inc VAT for homes); minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Crawley (4.4 mi), Redhill (4.6 mi), Reigate (4.8 mi), East Grinstead (7.5 mi)
What Horley sites use timber bollards for
Common uses in a place like Horley:
- Holiday parks, campsites and farm shops
- Village greens and recreation grounds
- Country parks, nature reserves and woodland car parks
Guide prices for Horley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £105–£215 + VAT · £125–£255 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £185–£295 + VAT · £215–£345 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £265–£365 + VAT · £315–£435 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Horley
In Horley, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Horley is listed or inside a conservation area, check with the local planning authority (the council for Reigate and Banstead) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Timber bollards usually go into soft landscape, so the ground varies more than with paved sites. Clay holds water against the timber and benefits from a free-draining stone base; sandy ground may need a concrete surround to stop posts loosening.
- Fit reflective bands or white tops where posts stand beside roads or in unlit car parks.
- Leave pedestrian gaps of typically at least 1,000–1,200 mm, and wider at path entrances used by cycles, buggies and mobility scooters, referring to Inclusive Mobility guidance.
How the job runs
Dig the holes
Holes are dug by hand or auger to the required depth, avoiding roots and checking for services along verges and footpaths.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Finish and tidy
Reflective bands are fitted, turf is reinstated around the posts and spoil is removed or spread as agreed.
Choosing the right spec
| Option | Detail |
|---|---|
| Sizes and profiles | Commonly 100–200 mm square or round, with chamfered, pyramid or domed tops to shed water. |
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
| Oak | Naturally durable heartwood that weathers to silver-grey. Suits parks, heritage settings and visible frontages. |
What affects the quote
Two Horley jobs with the same number of posts can price quite differently. The usual reasons:
- Ground conditions, roots and services
- Species: treated softwood, oak or tropical hardwood
- Post size and length
Looking after them
Timber naturally moves, checks and splits along its length as it dries; surface cracks in oak and hardwood are normal and rarely affect strength. Replacing individual damaged posts is straightforward if the original size and species are recorded.
We can also service, repair or replace existing posts anywhere in Horley.
Common questions
Do you install timber bollards in Horley?
We cover all of Horley (RH6) and the rest of Surrey. We also work in Crawley, Redhill and Reigate.
Who gives permission for bollards on the pavement in Horley?
Surrey County Council is the highway authority covering Horley's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do timber bollards cost in Horley?
In Horley, typically £105–£365 per post, supplied and installed, plus VAT (£125–£435 including VAT for homeowners), with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Why is my new oak bollard cracking?
Oak shrinks as it dries, and surface checks and splits are a normal part of that. They rarely affect the post's strength. Deep splits that run right through, or soft wood at the base, are a different matter.
Is tropical hardwood a sustainable choice?
It can be, if it comes from certified sustainable sources. Ask for certification with the order. Oak and treated softwood from managed forests are alternatives.
Timber bollards near Horley
- Crawley (4.4 mi)
- Redhill (4.6 mi)
- Reigate (4.8 mi)
- East Grinstead (7.5 mi)
- Caterham (8.2 mi)
- Banstead (10.4 mi)