Wales · 3 towns
Warehouse and loading-bay bollards in Monmouthshire
Warehouse bollards for sites across Monmouthshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageWarehouse bollards in Monmouthshire
Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses. We cover Monmouthshire — Abergavenny, Chepstow and Monmouth.
Highway authorities for local roads in Monmouthshire: Monmouthshire County Council.
Choose your town in Monmouthshire
Guide prices in Monmouthshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £165–£585 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £465–£885 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £765–£1,145 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Monmouthshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Abergavenny | Monmouthshire County Council | Monmouthshire County Council |
| Chepstow | Monmouthshire County Council | Monmouthshire County Council |
| Monmouth | Monmouthshire County Council | Monmouthshire County Council |
Rules for warehouse impact bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Wales.
How installation works
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Plan around operations
Work is phased by aisle or zone, or done out of hours, with each area barriered off while drilling. Dust is controlled with extraction where products are stored nearby.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Warehouse bollards in Monmouthshire: FAQs
Do you cover all of Monmouthshire for warehouse impact bollards?
Yes — including Abergavenny, Chepstow and Monmouth. Enter your postcode in the price calculator to confirm.
How much do warehouse impact bollards cost in Monmouthshire?
In Monmouthshire, typically £165–£1,145 per bollard, supplied and fixed, plus VAT, with a minimum job of £425 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Monmouthshire?
For local roads, Monmouthshire County Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What size bollard do we need for forklifts?
That depends on the forklift's weight with load and how fast it travels near the asset, not just the post diameter. Tested products state their impact performance, which can be compared with your fleet. We size from your vehicles at the survey.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.