West Sussex · England
Automatic rising bollard installation in Worthing
Automatic bollards supplied and fitted in Worthing, West Sussex: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageWorthing automatic bollards
We supply and fit automatic bollards throughout Worthing, typically for sites such as industrial estates, retail parks and college campuses. Automatic bollards are available unrated for traffic control or crash-tested for security entrances.
We work across BN11, BN14, BN13 and BN12 — Worthing itself and places including Cote. Nearby, we also work in Littlehampton (7.2 miles), Portslade (7.2 miles), Hove (9.1 miles) and Brighton (10.3 miles), measured as the crow flies. Worthing is about 10 miles from Brighton.
Worthing at a glance
- Area
- West Sussex, England
- Highway authority
- West Sussex County Council (local roads)
- Planning authority
- the council for Worthing
- Postcodes
- BN11, BN14, BN13 and BN12
- Guide price
- Typically £3,195–£15,895 per bollard + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Littlehampton (7.2 mi), Portslade (7.2 mi), Hove (9.1 mi), Brighton (10.3 mi)
What automatic bollards cost in Worthing
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £3,195–£8,495 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,995–£12,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,795–£15,895 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; +6% for South East. Guide only — the fixed price follows a survey.
Where automatic bollards go in around Worthing
Typical reasons Worthing sites choose automatic bollards:
- Emergency access routes that must open on demand
- Private estates and gated developments without a full gate
- Entrances where a gate would block pedestrian desire lines
Permissions and groundwork in Worthing
In Worthing, work on adopted pavements and verges needs consent from West Sussex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Worthing) first — we flag this at survey.
Automatic bollards need a deep pit for the cassette and a reliable way for water to leave it. Reinstatement around each cassette is made flush so vehicles pass smoothly over the lowered head.
- Agree emergency access with the fire and ambulance services, including how they will lower the bollards.
- Prepare a written risk assessment covering pedestrians, cyclists, following vehicles and children, and choose safety devices to match.
How the job runs
Survey and risk assessment
A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Choosing the right spec
| Option | Detail |
|---|---|
| Heights and diameters | Raised heights are commonly around 500–800 mm for traffic control and taller for security models, with diameters varying by drive and rating. |
| Hydraulic drive | Integral or remote power pack. Suits high-frequency entrances and heavier rated units, with periodic checks on fluid, seals and hoses. |
| Head lighting and finishes | LED rings or lights in the head, reflective bands, and powder-coated or stainless finishes. Lit heads help drivers see the post when it is raised. |
Pricing automatic bollards in Worthing
Our South East guide prices are a starting point; the survey in Worthing firms them up. What tends to move them:
- Traffic management during installation on live roads
- Surface condition for loops and the extent of reinstatement
- Length of duct runs, drainage connections and power supply distance
Keeping them working
Frequency depends on how often the bollard cycles; a busy entrance needs more visits than a rarely used one. Between visits, site staff should keep the head clear of grit and leaves, report slow or noisy movement early and never override safety devices to keep an entrance open.
We can also service, repair or replace existing posts anywhere in Worthing.
Automatic bollards in Worthing: FAQs
Which parts of Worthing do you cover for automatic bollards?
We cover all of Worthing (BN11, BN14, BN13 and BN12) and the rest of West Sussex. We also work in Littlehampton, Portslade and Hove.
Do I need consent for automatic bollards on a public footway in Worthing?
The highway authority for local roads in Worthing is West Sussex County Council; motorways and trunk roads sit with National Highways. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do automatic bollards cost in Worthing?
In Worthing, typically £3,195–£15,895 per bollard, installed with controls, loops and commissioning, plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Why do automatic bollards need drainage?
The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.
How will emergency vehicles get through?
Usually by an agreed method such as a fire service key switch, a code, a remote handset held by the site or a free-exit arrangement. It should be agreed with the emergency services before the bollards go live.
Automatic bollards near Worthing
- Littlehampton (7.2 mi)
- Portslade (7.2 mi)
- Hove (9.1 mi)
- Brighton (10.3 mi)
- Bognor Regis (13.5 mi)
- Rottingdean (13.8 mi)