Bollard Installers

West Sussex · England

Steel security bollard installation in Worthing

Planning steel security bollards in Worthing? We check ownership, consents and buried services first, then quote a fixed price.

Black steel security bollards with white reflective bands in front of a commercial unit roller shutter on an industrial estateComputer-generated image

Steel security bollards in Worthing

Steel security bollards suit plenty of Worthing sites, business parks, leisure centres and retail parks among them. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.

Coverage in Worthing takes in the BN11, BN14, BN13 and BN12 postcode districts and nearby places like Cote. We also cover neighbouring Littlehampton (7.2 miles), Portslade (7.2 miles), Hove (9.1 miles) and Brighton (10.3 miles) — distances are straight-line. It sits roughly 10 miles from Brighton as the crow flies.

Key facts for this area

Area
West Sussex, England
Highway authority
West Sussex County Council (local roads)
Planning authority
the council for Worthing
Postcodes
BN11, BN14, BN13 and BN12
Guide price
Typically £205–£945 per bollard + VAT (£245–£1,145 inc VAT for homes); minimum job £625
Survey
Free, with a fixed written quote
Nearby
Littlehampton (7.2 mi), Portslade (7.2 mi), Hove (9.1 mi), Brighton (10.3 mi)

Steel security bollards in Worthing: common uses

Around Worthing, steel security bollards usually solve one of these:

  • Protecting meter boxes, gas kiosks, pillars and corners
  • Forecourts and building entrances needing a visible boundary
  • Stopping cut-through traffic on private roads and estates

Guide prices for Worthing

SpecificationGuide priceIncludes
Standard£205–£515 + VAT · £245–£615 inc VATStandard post, foundation, reinstatement
Upgraded£425–£745 + VAT · £505–£885 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£655–£945 + VAT · £785–£1,145 inc VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.

Consents, ground and services in Worthing

The highway authority for local roads in Worthing is West Sussex County Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Worthing) first — we flag this at survey.

Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging. Base plates must sit on a slab thick and sound enough to hold resin anchors; cracked or thin concrete will let the anchors pull out on the first knock.

  • Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
  • Check whether the land is public highway or adopted verge before installing; the highway authority's agreement is usually needed.

How the job runs

Survey and set out

A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.

Fill and cap

Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.

Reinstate and finish

The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.

Options to consider

OptionDetail
Concrete infillAdds mass and stiffness and makes the post harder to cut or dent. Usually specified for security and impact positions.
Base-platedBolted to a sound concrete slab with resin anchors. Quick to fit and easy to remove later, suited to light-duty and indoor use.
FinishesHot-dip galvanised, then powder-coated in a RAL colour if wanted. Black, grey, yellow and green are common.

What moves the price in Worthing

Our South East guide prices are a starting point; the survey in Worthing firms them up. What tends to move them:

  • Ground conditions and buried services
  • Surface reinstatement such as block paving or tarmac
  • Finish: galvanised only or powder-coated

After installation

Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather. A post that leans after a knock usually means the foundation has moved or cracked; it should be re-bedded or replaced rather than left as a trip or snag hazard.

If posts in Worthing are later hit or damaged, we can repair or replace them — see bollard repairs.

Common questions

Can you install steel security bollards anywhere in Worthing?

We cover all of Worthing (BN11, BN14, BN13 and BN12) and the rest of West Sussex. We also work in Littlehampton, Portslade and Hove.

Who gives permission for bollards on the pavement in Worthing?

The highway authority for local roads in Worthing is West Sussex County Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

How much do steel security bollards cost in Worthing?

In Worthing, typically £205–£945 per bollard, supplied and installed, plus VAT (£245–£1,145 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.

Will galvanised posts rust?

Hot-dip galvanising protects steel for a long time in normal outdoor conditions. Powder coat over the galvanising adds colour and extra protection. Touch up chips promptly in coastal or heavily salted locations.

Can new posts match our existing ones?

Usually, if we can measure the existing diameter, height, cap and colour. Galvanised steel in standard sizes is easy to match; older or unusual sections may need a close equivalent.

Steel security bollards in nearby towns

More from us in Worthing

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote