Perth and Kinross · Scotland
Bollard replacement in Blairgowrie
Local installation of replacement bollards in Blairgowrie — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageBollard replacement in Blairgowrie
Like-for-like or upgraded replacement of bollards damaged by vehicles, corrosion or wear, matched to the existing line. In Blairgowrie, that tends to mean sites such as community car parks, community buildings and local parades.
Coverage in Blairgowrie takes in the PH10, PH13 and PH11 postcode districts and nearby places like Carsie, Kinloch, Bridge of Cally and Coupar Angus. Nearby, we also work in Perth (14 miles), Dundee (16.3 miles) and Forfar (17.5 miles), measured as the crow flies.
Blairgowrie at a glance
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH10, PH13 and PH11
- Guide price
- Typically £215–£1,195 per post + VAT (£255–£1,445 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
Why Blairgowrie sites book replacement bollards
Typical reasons for replacement bollards in Blairgowrie:
- Crushed sockets and failed telescopic cassettes
- Corroded steel posts at the end of their life
- Cracked cast iron or chipped concrete bollards
Replacement bollard prices in Blairgowrie
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £215–£625 + VAT · £255–£745 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £505–£925 + VAT · £605–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £805–£1,195 + VAT · £965–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Blairgowrie
In Scotland the council is the roads authority for local roads, which in Blairgowrie means Perth and Kinross Council. Bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Perth and Kinross Council can confirm before anything is ordered.
Upgrades to rated products usually need a completely new, larger foundation. Where a replacement is being made after an impact, the surrounding paving and kerbs are checked as well, because a vehicle that bent a post has often lifted or cracked the surface beside it, and that damage is included in the quote rather than left for later.
- Keep gaps and visibility bands in line with Inclusive Mobility guidance when replacing posts on pedestrian routes.
- On public highway, the roads authority may need to approve the replacement or carry out the work itself.
From survey to handover
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Order the replacement
Matching posts, sockets or castings are ordered, and you see details of any close equivalent before it is confirmed.
Install the new post
The new bollard is set in a fresh foundation, aligned with its neighbours and the surface is reinstated to match.
Specification choices
| Option | Detail |
|---|---|
| Matched finishes | RAL powder coat, stainless grade and finish, or heritage paint schemes matched to the existing line. |
| Change of type | Swapping fixed posts for removable, telescopic, flexible or polymer bollards to suit how the site is used. |
| Crash-rated upgrade | Replacing unrated posts with tested products, installed to the manufacturer's foundation design and specified with your security adviser. |
What moves the price in Blairgowrie
Two Blairgowrie jobs with the same number of posts can price quite differently. The usual reasons:
- Size and condition of the old foundation
- Number of posts and the product chosen
- Upgrades that need larger foundations
Keeping them working
Keep a record of the new product, finish and supplier so future replacements match. A single impact on a rarely struck post is bad luck; repeated strikes in the same spot point to a layout problem, such as a tight turn or a missing wheel stop, that a stronger bollard alone will not solve.
For damaged or loose posts in Blairgowrie, repairs and replacements are priced in writing first.
Common questions
Can you carry out replacement bollards anywhere in Blairgowrie?
We cover all of Blairgowrie (PH10, PH13 and PH11) and the rest of Perth and Kinross. We also work in Perth, Dundee and Forfar.
Do I need consent for bollards on a public footway in Blairgowrie?
Blairgowrie falls under Perth and Kinross Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
How much do replacement bollards cost in Blairgowrie?
In Blairgowrie, typically £215–£1,195 per post replaced, old post and footing removed, plus VAT (£255–£1,445 including VAT for homeowners), with a minimum job of £445 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the old bollard?
It is taken away with the broken-out concrete. Steel and iron are recycled where possible. Original heritage bollards can be returned to you if you want to keep them.
Can you replace just one bollard in a line?
Yes. We measure and match the existing posts so the new one sits in line at the same height and finish. If the original product is no longer made, we show you a close equivalent first.