Perth and Kinross · Scotland
Pedestrian protection bollards in Blairgowrie
Pedestrian protection bollards supplied and fitted in Blairgowrie, Perth and Kinross: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout pedestrian protection bollards in Blairgowrie
In the town of Blairgowrie, pedestrian protection bollards tend to go in at filling-station forecourts, local parades and high street shopfronts. Bollards that separate people from vehicles at car parks, forecourts, walkways, drive-thrus and shop entrances.
We cover Blairgowrie's PH10, PH13 and PH11 postcode districts, including places such as Carsie, Kinloch, Bridge of Cally and Coupar Angus. Jobs in Blairgowrie can be combined with work in Perth (14 miles), Dundee (16.3 miles) and Forfar (17.5 miles) (straight-line distances).
Local details
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH10, PH13 and PH11
- Guide price
- Typically £245–£1,195 per bollard + VAT; minimum job £595
- Survey
- Free, with a fixed written quote
Blairgowrie: typical pedestrian protection bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£645 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£925 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £815–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Blairgowrie sites use pedestrian protection bollards for
Common uses in a place like Blairgowrie:
- Outdoor seating at cafes, pubs and restaurants
- School and hospital drop-off zones
- Shop entrances facing nose-in parking bays
Permissions and groundwork in Blairgowrie
For anything on the public footway in Blairgowrie we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
If your site in Blairgowrie is listed or inside a conservation area, check with the local planning authority (Perth and Kinross Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Where bollards protect a shopfront, the building's own foundations and any canopy columns may sit close to the line, which limits how deep and wide each base can go. Raised kerbs also change the picture: a high kerb slows a wheel but does not stop a bumper, so the post still needs to sit within reach of the overhang rather than behind it.
- If a tested product has been requested, confirm PAS 170-1 or another stated standard and install to the tested foundation.
- Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
Installation, step by step
Reinstate
Paving, tarmac or concrete is made good flush around each post, with tactile paving reinstated where it was disturbed.
Add bands and markings
Reflective bands are fitted and any wheel stops or line markings agreed in the scheme are installed.
Agree a plan for live trading
Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.
Options to consider
| Option | Detail |
|---|---|
| Stainless or architectural finishes | Stainless sleeves or decorative posts for shop entrances and public-facing frontages. |
| Lit bollards | Low-level lighting bollards double as protection on walkways where the product is robust enough for the job. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts, for sites where proven performance has been asked for. |
What affects the quote
When we price pedestrian protection bollards in Blairgowrie, these make the biggest difference:
- Reinstatement of tactile paving and walkway surfaces
- Working around trading hours and live car parks
- Finishes such as stainless or decorative posts
Keeping them working
A post that leans or rocks has lost much of its value and should be re-bedded or replaced. Keep a simple note of strikes and their locations; over a year it shows which parts of the car park drivers find awkward, which is useful when the site is next resurfaced or re-lined.
We can also service, repair or replace existing posts anywhere in Blairgowrie.
Pedestrian protection in Blairgowrie: FAQs
Do you install pedestrian protection bollards in Blairgowrie?
We cover all of Blairgowrie (PH10, PH13 and PH11) and the rest of Perth and Kinross. We also work in Perth, Dundee and Forfar.
Do I need consent for pedestrian protection bollards on a public footway in Blairgowrie?
For anything on the public footway in Blairgowrie we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do pedestrian protection bollards cost in Blairgowrie?
In Blairgowrie, typically £245–£1,195 per bollard, supplied and installed, plus VAT, with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Do pedestrian protection bollards need to be crash-rated?
Not usually. They deal with low-speed driver errors, so firmly founded steel posts often suffice. Where an owner, insurer or designer wants proven performance, PAS 170-1 tested products are the usual choice.
Should bollards be added at a drive-thru order point?
Often, yes, where people queue or sit beside the lane. Posts should follow the curve of the lane and be closest together at corners, where drivers tend to misjudge the turn. The positions are agreed on site with the operator.