East Lothian · Scotland
Crash-rated bollard installation in Dunbar
Local installation of crash-rated bollards in Dunbar — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageDunbar crash-rated bollards
In the town of Dunbar, crash-rated bollards tend to go in at schools, town-centre squares and filling-station forecourts. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
We work across EH42 and EH40 — Dunbar itself and places including West Barns, Innerwick, Spott and Whitekirk. Jobs in Dunbar can be combined with work in Tranent (17.4 miles) and Musselburgh (21.1 miles) (straight-line distances). It sits roughly 27 miles from Edinburgh as the crow flies.
Dunbar at a glance
- Area
- East Lothian, Scotland
- Roads authority
- East Lothian Council (local roads)
- Planning authority
- East Lothian Council
- Postcodes
- EH42 and EH40
- Guide price
- Typically £1,995–£9,995 per bollard + VAT; minimum job £3,995
- Survey
- Free, with a fixed written quote
- Nearby
- Tranent (17.4 mi), Musselburgh (21.1 mi)
Typical crash-rated bollards jobs in Dunbar
Typical reasons Dunbar sites choose crash-rated bollards:
- Building entrances and forecourts flagged in a security risk assessment
- Sites where a vehicle dynamics assessment shows a long straight run-up
- Stadiums, arenas and event venues with predictable crowd flows
Guide prices for Dunbar
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Dunbar
For anything on the public footway in Dunbar we check with the roads authority first — East Lothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
If your site in Dunbar is listed or inside a conservation area, check with the local planning authority (East Lothian Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Made ground, a high water table or soft clay may need an engineer to confirm the tested design suits the site; any change to depth, width or reinforcement must be agreed in writing by the manufacturer, or the rating may no longer apply. Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
- Balance the gaps: narrow enough to stop a vehicle, typically no more than about 1,200 mm, but wide enough for wheelchair users and buggies — check against Inclusive Mobility guidance.
From survey to handover
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Options to consider
| Option | Detail |
|---|---|
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
| Finishes and visibility bands | Galvanised and powder-coated finishes in RAL colours, with contrasting or reflective bands near the top so the posts are visible to pedestrians and drivers. |
| Decorative covers | Stainless steel, cast or polymer sleeves can be fitted over the steel core to suit a streetscape. Use covers supplied or approved by the manufacturer so the tested product is not altered. |
Pricing crash-rated bollards in Dunbar
Two Dunbar jobs with the same number of posts can price quite differently. The usual reasons:
- Buried services, diversions and ground investigation
- Number of posts and whether a linked beam system is needed
- Covers, finishes and any integrated lighting
Looking after them
A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened. Keep inspection records with the original test certificate so the line's condition can be shown to insurers or a security adviser.
If posts in Dunbar are later hit or damaged, we can repair or replace them — see bollard repairs.
Crash-rated bollards in Dunbar: FAQs
Which parts of Dunbar do you cover for crash-rated bollards?
We cover all of Dunbar (EH42 and EH40) and the rest of East Lothian. We also work in Tranent and Musselburgh.
Do I need consent for crash-rated bollards on a public footway in Dunbar?
For anything on the public footway in Dunbar we check with the roads authority first — East Lothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do crash-rated bollards cost in Dunbar?
In Dunbar, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.
Why can't the foundation be adjusted to suit our ground?
Because the rating belongs to the bollard and foundation as tested together. Making the hole shallower, narrower or lighter on steel changes how the system behaves on impact. If site conditions force a change, the manufacturer has to approve it in writing, and some changes mean choosing a different product such as a shallow-mount system.