Swansea · Wales
Lighting bollard installation in Clydach
Local installation of lighting bollards in Clydach — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout lighting bollards in Clydach
Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician. In Clydach, that tends to mean sites such as residential driveways, small industrial units and local parades.
We work across SA6 — Clydach itself and places including Craig-cefn-parc and Rhyd-y-gwin. Nearby, we also work in Neath (4.3 miles), Swansea (4.7 miles), Gorseinon (6.1 miles) and Port Talbot (7.7 miles), measured as the crow flies. It sits roughly 5 miles from Swansea as the crow flies.
Key facts for this area
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA6
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £815
- Survey
- Free, with a fixed written quote
- Nearby
- Neath (4.3 mi), Swansea (4.7 mi), Gorseinon (6.1 mi), Port Talbot (7.7 mi)
What lighting bollards cost in Clydach
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); -3% for Wales. Guide only — the fixed price follows a survey.
Where lighting bollards go in around Clydach
Common uses in a place like Clydach:
- Hotel, restaurant and pub frontages
- Parks and areas where tall columns would be intrusive
- Building entrances and approach routes
Consents, ground and services in Clydach
Local roads and pavements in Clydach are the responsibility of Swansea Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
If your site in Clydach is listed or inside a conservation area, check with the local planning authority (Swansea Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape. Most of the work in a lighting bollard scheme is underground.
- In homes, new outdoor circuits are often notifiable building work; a registered electrician can usually self-certify it.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
Installation, step by step
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Options to consider
| Option | Detail |
|---|---|
| Light distribution | 360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill. |
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
What affects the quote
When we price lighting bollards in Clydach, these make the biggest difference:
- Number of bollards and their specification
- Controls such as photocells, timers or sensors
- Mains or solar bollards
After installation
A periodic electrical inspection checks that connections and protection are still sound. Clean diffusers so dirt and algae do not dim the light, check seals and fixings, and look for impact damage, especially in car parks.
If posts in Clydach are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about lighting bollards in Clydach
Can you install lighting bollards anywhere in Clydach?
We cover all of Clydach (SA6) and the rest of Swansea. We also work in Neath, Swansea and Gorseinon.
Who gives permission for bollards on the pavement in Clydach?
Local roads and pavements in Clydach are the responsibility of Swansea Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
How much do lighting bollards cost in Clydach?
In Clydach, typically £335–£1,145 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £815 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Lighting bollards near Clydach
- Neath (4.3 mi)
- Swansea (4.7 mi)
- Gorseinon (6.1 mi)
- Port Talbot (7.7 mi)
- Ystalyfera (7.7 mi)
- Ammanford (8.5 mi)