Isle of Anglesey · Wales
Pedestrian protection bollards in Holyhead
Planning pedestrian protection bollards in Holyhead? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageHolyhead pedestrian protection bollards
Whether it's community car parks, filling-station forecourts and community buildings, pedestrian protection bollards in Holyhead are planned around who needs to get through and who doesn't. Products range from unrated steel posts to bollards tested against low-speed impacts under PAS 170-1.
We cover Holyhead's LL65 postcode district, including places such as Trearddur, Bodedern, Bryngwran and Llanfihangel yn Nhowyn. Holyhead is fairly self-contained, with no other large town within about 20 miles.
Holyhead at a glance
- Area
- Isle of Anglesey, Wales
- Highway authority
- Isle of Anglesey County Council (local roads)
- Planning authority
- Isle of Anglesey County Council
- Postcodes
- LL65
- Guide price
- Typically £235–£1,145 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
Typical pedestrian protection bollards jobs in Holyhead
Around Holyhead, pedestrian protection bollards usually solve one of these:
- Drive-thru lanes and order points next to seating
- Outdoor seating at cafes, pubs and restaurants
- Petrol station forecourts and kiosk frontages
Guide prices for Holyhead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £235–£625 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£905 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £795–£1,145 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Permissions and groundwork in Holyhead
Local roads and pavements in Holyhead are the responsibility of Isle of Anglesey County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
If your site in Holyhead is listed or inside a conservation area, check with the local planning authority (Isle of Anglesey County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Where bollards protect a shopfront, the building's own foundations and any canopy columns may sit close to the line, which limits how deep and wide each base can go. Reinstatement keeps walkways level and flush, because a trip edge around a new post in a busy car park creates the very hazard the posts are meant to reduce.
- Record why posts are where they are in the site's risk assessment, especially at drive-thrus and seating areas.
- Use contrasting bands so posts are visible to partially sighted people, and avoid linking chains across routes.
Installation, step by step
Excavate and set
Each position is cut, dug and checked for services, and the posts are set plumb in concrete to a consistent height.
Add bands and markings
Reflective bands are fitted and any wheel stops or line markings agreed in the scheme are installed.
Agree a plan for live trading
Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.
Choosing the right spec
| Option | Detail |
|---|---|
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts, for sites where proven performance has been asked for. |
| Wheel stops and kerbs | Used with bollards to stop cars before they reach the posts, reducing daily knocks. |
| Stainless or architectural finishes | Stainless sleeves or decorative posts for shop entrances and public-facing frontages. |
What moves the price in Holyhead
Our Wales guide prices are a starting point; the survey in Holyhead firms them up. What tends to move them:
- Working around trading hours and live car parks
- Number of posts and length of line
- Reinstatement of tactile paving and walkway surfaces
Keeping them working
A post that leans or rocks has lost much of its value and should be re-bedded or replaced. Touch up chipped coatings, renew faded bands, and check the surface around each base for cracks that suggest movement.
For damaged or loose posts in Holyhead, repairs and replacements are priced in writing first.
Questions about pedestrian protection bollards in Holyhead
Which parts of Holyhead do you cover for pedestrian protection bollards?
We cover all of Holyhead (LL65) and the rest of Isle of Anglesey.
Do I need consent for pedestrian protection bollards on a public footway in Holyhead?
Local roads and pavements in Holyhead are the responsibility of Isle of Anglesey County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
How much do pedestrian protection bollards cost in Holyhead?
In Holyhead, typically £235–£1,145 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Do pedestrian protection bollards need to be crash-rated?
Not usually. They deal with low-speed driver errors, so firmly founded steel posts often suffice. Where an owner, insurer or designer wants proven performance, PAS 170-1 tested products are the usual choice.
Are wheel stops enough on their own?
Wheel stops help drivers judge where to stop but a car can mount them with a firm press on the accelerator. Used with bollards, they reduce daily knocks on the posts. On their own they are not a barrier.