Isle of Anglesey · Wales
Lighting bollard installation in Holyhead
Lighting bollards supplied and fitted in Holyhead, Isle of Anglesey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout lighting bollards in Holyhead
In the town of Holyhead, lighting bollards tend to go in at filling-station forecourts, small industrial units and residential driveways. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
Coverage in Holyhead takes in the LL65 postcode district and nearby places like Trearddur, Bodedern, Bryngwran and Llanfihangel yn Nhowyn. Holyhead is fairly self-contained, with no other large town within about 20 miles.
Holyhead at a glance
- Area
- Isle of Anglesey, Wales
- Highway authority
- Isle of Anglesey County Council (local roads)
- Planning authority
- Isle of Anglesey County Council
- Postcodes
- LL65
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £815
- Survey
- Free, with a fixed written quote
Holyhead: typical lighting bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); -3% for Wales. Guide only — the fixed price follows a survey.
What Holyhead sites use lighting bollards for
Typical reasons Holyhead sites choose lighting bollards:
- Building entrances and approach routes
- Car park walkways and pedestrian crossings
- Parks and areas where tall columns would be intrusive
Before we dig in Holyhead
Local roads and pavements in Holyhead are the responsibility of Isle of Anglesey County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
If your site in Holyhead is listed or inside a conservation area, check with the local planning authority (Isle of Anglesey County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services. Most of the work in a lighting bollard scheme is underground.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
From survey to handover
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Choosing the right spec
| Option | Detail |
|---|---|
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Mains LED bollards | Wired from a dedicated circuit for reliable lighting of paths and car parks. Needs cable routes and electrical certification. |
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
What moves the price in Holyhead
Our Wales guide prices are a starting point; the survey in Holyhead firms them up. What tends to move them:
- Controls such as photocells, timers or sensors
- Mains or solar bollards
- Reinstatement of paving, tarmac or planting
Keeping them working
Photocells and timers need resetting when the clocks change unless they adjust automatically. LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free.
If posts in Holyhead are later hit or damaged, we can repair or replace them — see bollard repairs.
Lighting bollards in Holyhead: FAQs
Can you install lighting bollards anywhere in Holyhead?
We cover all of Holyhead (LL65) and the rest of Isle of Anglesey.
Do I need consent for lighting bollards on a public footway in Holyhead?
Local roads and pavements in Holyhead are the responsibility of Isle of Anglesey County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for lighting bollards in Holyhead?
In Holyhead, typically £335–£1,145 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £815 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Are solar bollard lights worth it?
For marking edges and low-use paths, they can be, because there is no cabling to install. They give less light than mains bollards and perform poorly in shaded spots and short winter days. For lighting a route properly, mains bollards are more dependable.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.