Bollard Installers

London · England

Pedestrian protection bollards in Barnet

Local installation of pedestrian protection bollards in Barnet — free survey, fixed written price, and posts set to the right spacing for people and vehicles.

Black bollards lining the walkway outside a supermarket entrance, separating shoppers from the car parkComputer-generated image

Pedestrian protection in Barnet

In the borough of Barnet, pedestrian protection bollards tend to go in at shopping parades, office entrances and school gates. Bollards that separate people from vehicles at car parks, forecourts, walkways, drive-thrus and shop entrances.

We cover Barnet's EN5, EN4, NW7, N3, N12 and NW4 postcode districts, including places such as Kitts End, Rowley Green, Edgware and Finchley. We also cover neighbouring Borehamwood (4.1 miles), Brent (4.3 miles), Haringey (4.8 miles) and Camden (5.2 miles) — distances are straight-line.

Key facts for this area

Area
London, England
Highway authority
Barnet Council (local roads)
Planning authority
Barnet Council
Postcodes
EN5, EN4, NW7, N3, N12, NW4, N20 and N2
Guide price
Typically £285–£1,395 per bollard + VAT; minimum job £675
Survey
Free, with a fixed written quote
Nearby
Borehamwood (4.1 mi), Brent (4.3 mi), Haringey (4.8 mi), Camden (5.2 mi)

Where pedestrian protection bollards go in around Barnet

Typical reasons Barnet sites choose pedestrian protection bollards:

  • Walkways through supermarket and retail park car parks
  • EV charging points and trolley shelters
  • School and hospital drop-off zones

Guide prices for Barnet

SpecificationGuide priceIncludes
Standard£285–£745 + VATStandard post, foundation, reinstatement
Upgraded£615–£1,045 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£935–£1,395 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.

Consents, ground and services in Barnet

In Barnet, work on adopted pavements and verges needs consent from Barnet Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.

Many private-land installations in Barnet need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Barnet Council before posts go in.

Car park edges and walkways tend to be built quickly over shallow hardcore, and their kerb lines often carry lighting cables, drainage channels and ducts for EV chargers or signs. Positions are scanned and hand-dug before committing, and foundations are sized for the ground found rather than a fixed hole size.

  • Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
  • If a tested product has been requested, confirm PAS 170-1 or another stated standard and install to the tested foundation.

Installation, step by step

Watch how the site works

The free site survey looks at where cars park, where people walk and queue, and where incidents or near misses have happened. You receive a fixed written quote with positions marked.

Reinstate

Paving, tarmac or concrete is made good flush around each post, with tactile paving reinstated where it was disturbed.

Agree a plan for live trading

Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.

Specification choices

OptionDetail
Stainless or architectural finishesStainless sleeves or decorative posts for shop entrances and public-facing frontages.
PAS 170-1 tested bollardsTested against low-speed vehicle impacts, for sites where proven performance has been asked for.
Concrete-filled steel postsRoot-fixed galvanised and powder-coated steel, the standard unrated choice for walkways and frontages.

Pricing pedestrian protection bollards in Barnet

Two Barnet jobs with the same number of posts can price quite differently. The usual reasons:

  • Number of posts and length of line
  • Finishes such as stainless or decorative posts
  • Working around trading hours and live car parks

Looking after them

If one post keeps being hit, look at the bay layout or add a wheel stop rather than replacing the same post repeatedly. Keep a simple note of strikes and their locations; over a year it shows which parts of the car park drivers find awkward, which is useful when the site is next resurfaced or re-lined.

For damaged or loose posts in Barnet, repairs and replacements are priced in writing first.

Questions about pedestrian protection bollards in Barnet

Do you install pedestrian protection bollards in Barnet?

We cover all of Barnet (EN5, EN4, NW7, N3, N12 and NW4) and the rest of London. We also work in Borehamwood, Brent and Haringey.

Who gives permission for bollards on the pavement in Barnet?

Barnet Council is the highway authority covering Barnet's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

How much do pedestrian protection bollards cost in Barnet?

In Barnet, typically £285–£1,395 per bollard, supplied and installed, plus VAT, with a minimum job of £675 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.

How far from the kerb should car park bollards go?

Far enough back that parked bumpers do not hit them, but not so far that they narrow the walkway. That distance depends on the bay length and kerb height. We set it on site with the layout in front of us.

Our outdoor seating faces the car park: what should we do?

Put a line of posts between the seating and the nearest parking or driving lane, with gaps narrow enough to stop a car. Positions should allow for cars that overshoot a bay. It is worth recording the decision in your risk assessment.

Pedestrian protection near Barnet

More from us in Barnet

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote