London · England
Pedestrian protection bollards in Ealing
Planning pedestrian protection bollards in Ealing? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imagePedestrian protection in Ealing
Across Ealing, typical sites for pedestrian protection bollards include estate car parks, places of worship and office entrances. Bollards that separate people from vehicles at car parks, forecourts, walkways, drive-thrus and shop entrances.
We cover Ealing's W13, W5, W7, UB6, W3 and UB1 postcode districts, including places such as Southall, Greenford and Northolt. Nearby, we also work in Brent (3.1 miles), Hammersmith and Fulham (4 miles), Harrow (5 miles) and Hounslow (5.1 miles), measured as the crow flies.
Ealing at a glance
- Area
- London, England
- Highway authority
- Ealing Council (local roads)
- Planning authority
- Ealing Council
- Postcodes
- W13, W5, W7, UB6, W3, UB1, UB5 and UB2
- Guide price
- Typically £285–£1,395 per bollard + VAT; minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Brent (3.1 mi), Hammersmith and Fulham (4 mi), Harrow (5 mi), Hounslow (5.1 mi)
Where pedestrian protection bollards go in around Ealing
Typical reasons Ealing sites choose pedestrian protection bollards:
- Drive-thru lanes and order points next to seating
- EV charging points and trolley shelters
- School and hospital drop-off zones
What pedestrian protection bollards cost in Ealing
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £285–£745 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £615–£1,045 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £935–£1,395 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Consents, ground and services in Ealing
Ealing Council is the highway authority covering Ealing's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Ealing is listed or inside a conservation area, check with the local planning authority (Ealing Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Car park edges and walkways tend to be built quickly over shallow hardcore, and their kerb lines often carry lighting cables, drainage channels and ducts for EV chargers or signs. Positions are scanned and hand-dug before committing, and foundations are sized for the ground found rather than a fixed hole size.
- Record why posts are where they are in the site's risk assessment, especially at drive-thrus and seating areas.
- Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
From survey to handover
Watch how the site works
The free site survey looks at where cars park, where people walk and queue, and where incidents or near misses have happened. You receive a fixed written quote with positions marked.
Add bands and markings
Reflective bands are fitted and any wheel stops or line markings agreed in the scheme are installed.
Agree a plan for live trading
Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.
Options to consider
| Option | Detail |
|---|---|
| Concrete-filled steel posts | Root-fixed galvanised and powder-coated steel, the standard unrated choice for walkways and frontages. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts, for sites where proven performance has been asked for. |
| Stainless or architectural finishes | Stainless sleeves or decorative posts for shop entrances and public-facing frontages. |
What affects the quote
Our London guide prices are a starting point; the survey in Ealing firms them up. What tends to move them:
- Unrated steel or PAS 170-1 tested products
- Number of posts and length of line
- Finishes such as stainless or decorative posts
After installation
Damaged posts near entrances should be dealt with quickly, as a bent post with a torn edge is a hazard in its own right. Protection bollards take the knocks they are there for, so inspect them regularly and after any reported strike.
If posts in Ealing are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install pedestrian protection bollards anywhere in Ealing?
We cover all of Ealing (W13, W5, W7, UB6, W3 and UB1) and the rest of London. We also work in Brent, Hammersmith and Fulham and Harrow.
Who gives permission for bollards on the pavement in Ealing?
In Ealing, work on adopted pavements and verges needs consent from Ealing Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
How much do pedestrian protection bollards cost in Ealing?
In Ealing, typically £285–£1,395 per bollard, supplied and installed, plus VAT, with a minimum job of £675 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
How far from the kerb should car park bollards go?
Far enough back that parked bumpers do not hit them, but not so far that they narrow the walkway. That distance depends on the bay length and kerb height. We set it on site with the layout in front of us.
Should bollards be added at a drive-thru order point?
Often, yes, where people queue or sit beside the lane. Posts should follow the curve of the lane and be closest together at corners, where drivers tend to misjudge the turn. The positions are agreed on site with the operator.
Pedestrian protection near Ealing
- Brent (3.1 mi)
- Hammersmith and Fulham (4 mi)
- Harrow (5 mi)
- Hounslow (5.1 mi)
- Kensington and Chelsea (5.1 mi)
- Hillingdon (5.9 mi)