Wales · 2 towns
Pedestrian protection bollards in Wrexham
Pedestrian protection for sites across Wrexham: surveyed, quoted in writing and installed by our crews.
Computer-generated imagePedestrian protection in Wrexham
We supply and install pedestrian protection bollards across Wrexham, with local pages for 2 towns below. Bollards that separate people from vehicles at car parks, forecourts, walkways, drive-thrus and shop entrances.
Highway authorities for local roads in Wrexham: Wrexham County Borough Council.
Choose your town in Wrexham
Guide prices in Wrexham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £235–£625 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£905 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £795–£1,145 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Wrexham
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Wrexham | Wrexham County Borough Council | Wrexham County Borough Council |
| Coedpoeth | Wrexham County Borough Council | Wrexham County Borough Council |
Rules for pedestrian protection bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Wales.
How installation works
Excavate and set
Each position is cut, dug and checked for services, and the posts are set plumb in concrete to a consistent height.
Reinstate
Paving, tarmac or concrete is made good flush around each post, with tactile paving reinstated where it was disturbed.
Add bands and markings
Reflective bands are fitted and any wheel stops or line markings agreed in the scheme are installed.
Agree a plan for live trading
Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.
Pedestrian protection in Wrexham: FAQs
Do you cover all of Wrexham for pedestrian protection bollards?
Yes — including Wrexham and Coedpoeth. Enter your postcode in the price calculator to confirm.
How much do pedestrian protection bollards cost in Wrexham?
In Wrexham, typically £235–£1,145 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Wrexham?
For local roads, Wrexham County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
Are wheel stops enough on their own?
Wheel stops help drivers judge where to stop but a car can mount them with a firm press on the accelerator. Used with bollards, they reduce daily knocks on the posts. On their own they are not a barrier.
Do pedestrian protection bollards need to be crash-rated?
Not usually. They deal with low-speed driver errors, so firmly founded steel posts often suffice. Where an owner, insurer or designer wants proven performance, PAS 170-1 tested products are the usual choice.