Wales · 2 towns
Shallow-mount security bollard installation in Wrexham
Shallow-mount bollards for sites across Wrexham: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in Wrexham
Across Wrexham, typical sites for shallow-mount bollards include community car parks, small industrial units and town-centre squares. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Highway authorities for local roads in Wrexham: Wrexham County Borough Council.
Choose your town in Wrexham
Guide prices in Wrexham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,795 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,845 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £5,995–£8,745 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Wrexham
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Wrexham | Wrexham County Borough Council | Wrexham County Borough Council |
| Coedpoeth | Wrexham County Borough Council | Wrexham County Borough Council |
Rules for shallow-mount bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Shallow-mount bollards in Wrexham: FAQs
Do you cover all of Wrexham for shallow-mount bollards?
Yes — including Wrexham and Coedpoeth. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in Wrexham?
In Wrexham, typically £1,945–£8,745 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,845 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Wrexham?
For local roads, Wrexham County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What if a service turns out to be higher than the records show?
Work stops at that position and the finding goes back to the manufacturer and your adviser. Sometimes the frame can be adjusted within tested limits; sometimes the utility has to be lowered or the line moved. We do not improvise a change to a rated foundation on site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.