Northern Ireland · 4 towns
Ram-raid protection bollards in Armagh City, Banbridge and Craigavon
Ram-raid bollards for sites across Armagh City, Banbridge and Craigavon: surveyed, quoted in writing and installed by our crews.
Computer-generated imageRam-raid bollards in Armagh City, Banbridge and Craigavon
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. We cover Armagh City, Banbridge and Craigavon — Craigavon, Portadown, Banbridge and Armagh.
Across Northern Ireland, DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways; councils handle planning.
Choose your town in Armagh City, Banbridge and Craigavon
Guide prices in Armagh City, Banbridge and Craigavon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £715–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for Northern Ireland. Guide only — the fixed price follows a survey.
Who looks after the roads in Armagh City, Banbridge and Craigavon
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Craigavon | the Department for Infrastructure (DfI Roads) | Armagh City, Banbridge and Craigavon Borough Council |
| Portadown | the Department for Infrastructure (DfI Roads) | Armagh City, Banbridge and Craigavon Borough Council |
| Banbridge | the Department for Infrastructure (DfI Roads) | Armagh City, Banbridge and Craigavon Borough Council |
| Armagh | the Department for Infrastructure (DfI Roads) | Armagh City, Banbridge and Craigavon Borough Council |
Rules for ram-raid bollards in Northern Ireland
Bollards on public footways and roads need DfI Roads consent under the Roads (NI) Order 1993; councils deal with planning. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Northern Ireland.
How installation works
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Ram-raid bollards in Armagh City, Banbridge and Craigavon: FAQs
Do you cover all of Armagh City, Banbridge and Craigavon for ram-raid bollards?
Yes — including Craigavon, Portadown, Banbridge and Armagh. Enter your postcode in the price calculator to confirm.
How much do ram-raid bollards cost in Armagh City, Banbridge and Craigavon?
In Armagh City, Banbridge and Craigavon, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our Northern Ireland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Armagh City, Banbridge and Craigavon?
DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways throughout Northern Ireland; councils handle planning.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.