Kent · England
Warehouse and loading-bay bollards in Deal
Local installation of warehouse impact bollards in Deal — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageDeal warehouse impact bollards
Whether it's community car parks, community buildings and high street shopfronts, warehouse impact bollards in Deal are planned around who needs to get through and who doesn't. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
We work across CT14 and CT13 — Deal itself and places including Sholden, Ringwould, Tilmanstone and Ripple. Jobs in Deal can be combined with work in Dover (7.8 miles), Ramsgate (7.8 miles), Broadstairs (9.5 miles) and Margate (11 miles) (straight-line distances).
Local details
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Dover
- Postcodes
- CT14 and CT13
- Guide price
- Typically £185–£1,245 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Dover (7.8 mi), Ramsgate (7.8 mi), Broadstairs (9.5 mi), Margate (11 mi)
Warehouse impact bollards in Deal: common uses
Around Deal, warehouse impact bollards usually solve one of these:
- Charging stations for forklifts and pallet trucks
- Racking ends and corners in busy aisles
- Loading dock doors, shutter guides and dock levellers
What warehouse impact bollards cost in Deal
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£635 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£965 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,245 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Deal
The highway authority for local roads in Deal is Kent County Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Dover) first — we flag this at survey.
Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation. Anchors need enough edge distance from slab joints and cracks or they will split the concrete on first impact.
- Check with the building owner before drilling into slabs with underfloor heating, guidance wires or post-tensioned reinforcement.
- Where impact performance matters, ask for products tested to PAS 13 and match the stated performance to your vehicles.
What happens on site
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Choosing the right spec
| Option | Detail |
|---|---|
| Diameters and heights | Commonly 114–273 mm diameter and around 600–1,200 mm high, chosen for vehicle type and mast or fork height. |
| Steel bollards | Yellow-coated steel tube on a base plate, often concrete-filled. Robust and economical, but they pass impact loads straight into the slab. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
What affects the quote
Two Deal jobs with the same number of posts can price quite differently. The usual reasons:
- Out-of-hours or phased working around operations
- Slab condition and the anchors or foundations it needs
- Removal of damaged existing protection
After installation
Inspect warehouse bollards regularly as part of routine site checks, and after any reported impact. Persistent strikes in one place often mean the route or turning space needs changing rather than heavier protection.
For damaged or loose posts in Deal, repairs and replacements are priced in writing first.
Questions about warehouse impact bollards in Deal
Can you install warehouse impact bollards anywhere in Deal?
We cover all of Deal (CT14 and CT13) and the rest of Kent. We also work in Dover, Ramsgate and Broadstairs.
Who gives permission for bollards on the pavement in Deal?
Kent County Council is the highway authority covering Deal's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for warehouse impact bollards in Deal?
In Deal, typically £185–£1,245 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Should we choose steel or polymer warehouse bollards?
Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.
How close to a column should a bollard sit?
Close enough that a vehicle cannot reach the column around it, but with enough gap that the bollard does not hit the column when struck. Polymer bollards need more clearance than steel because they deflect. The gap is set from the product data.
Warehouse bollards in nearby towns
- Dover (7.8 mi)
- Ramsgate (7.8 mi)
- Broadstairs (9.5 mi)
- Margate (11 mi)
- Folkestone (14.1 mi)
- Canterbury (14.5 mi)