Devon · England
Shallow-mount security bollard installation in Plymouth
Shallow-mount bollards for sites across Plymouth and the rest of Devon, from the first measurement to the last relaid paving block.
Computer-generated imageShallow-mount bollards in Plymouth
Shallow-mount bollards suit plenty of Plymouth sites, stadium approaches, university campuses and office forecourts among them. Like any rated product, its performance applies only to the configuration and foundation that were tested.
We cover the PL1, PL4, PL3, PL2, PL9 and PL5 postcode districts in Plymouth. We also cover neighbouring Plymstock (2.4 miles) — distances are straight-line.
Local details
- Area
- Devon, England
- Highway authority
- Plymouth City Council (local roads)
- Planning authority
- Plymouth City Council
- Postcodes
- PL1, PL4, PL3, PL2, PL9, PL5, PL6 and PL7
- Guide price
- Typically £1,995–£8,995 per bollard + VAT; minimum job £4,995
- Survey
- Free, with a fixed written quote
- Nearby
- Plymstock (2.4 mi)
Where shallow-mount bollards go in around Plymouth
Typical reasons Plymouth sites choose shallow-mount bollards:
- Lines that must cross over shallow drainage or ducts
- Bridges and structures where excavation depth is limited
- Footways with dense utility runs just below the surface
Shallow-mount bollard prices in Plymouth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Plymouth
The highway authority for local roads in Plymouth is Plymouth City Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Plymouth City Council) first — we flag this at survey.
Utility owners may set minimum separation distances or ask to be present when digging near their apparatus. Paving is often natural stone in the streets where these systems are used, so careful lifting, storage and relaying is part of the job.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
Installation, step by step
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Choosing the right spec
| Option | Detail |
|---|---|
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
| Removable posts within a run | Some systems include removable or retractable positions for maintenance or emergency access. Check how these affect the rating. |
Pricing shallow-mount bollards in Plymouth
Two Plymouth jobs with the same number of posts can price quite differently. The usual reasons:
- Changes of direction, end details and removable positions
- Restricted working hours in busy streets or occupied sites
- Length of run and the system needed to achieve the rating
Keeping them working
Pay attention to the surface around the posts, because settlement or loose paving can indicate movement in the bearing layer. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
We can also service, repair or replace existing posts anywhere in Plymouth.
Shallow-mount bollards in Plymouth: FAQs
Can you install shallow-mount bollards anywhere in Plymouth?
We cover all of Plymouth (PL1, PL4, PL3, PL2, PL9 and PL5) and the rest of Devon. We also work in Plymstock.
Who gives permission for bollards on the pavement in Plymouth?
In Plymouth, work on adopted pavements and verges needs consent from Plymouth City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do shallow-mount bollards cost in Plymouth?
In Plymouth, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What if a service turns out to be higher than the records show?
Work stops at that position and the finding goes back to the manufacturer and your adviser. Sometimes the frame can be adjusted within tested limits; sometimes the utility has to be lowered or the line moved. We do not improvise a change to a rated foundation on site.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.