London · England
Concrete bollard installation in Bexley
Planning concrete bollards in Bexley? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBexley concrete bollards
Across Bexley, typical sites for concrete bollards include hospital approaches, shopping parades and mews courtyards. Precast concrete and reconstituted stone bollards for public realm, parks, boundaries and estates, dowelled or bedded in place.
We work across DA5, DA7, DA6, DA16, DA8 and DA17 — Bexley itself and places including Coldblow, Sidcup and Erith. Jobs in Bexley can be combined with work in Dartford (3.2 miles), Greenwich (4.2 miles), Swanley (4.6 miles) and Barking and Dagenham (6.6 miles) (straight-line distances).
Local details
- Area
- London, England
- Highway authority
- Bexley Council (local roads)
- Planning authority
- Bexley Council
- Postcodes
- DA5, DA7, DA6, DA16, DA8, DA17, DA18 and DA15
- Guide price
- Typically £185–£635 per bollard + VAT; minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Dartford (3.2 mi), Greenwich (4.2 mi), Swanley (4.6 mi), Barking and Dagenham (6.6 mi)
Where concrete bollards go in around Bexley
Common uses in a place like Bexley:
- School, library and civic building forecourts
- Rural and coastal sites where steel would corrode
- Housing estates and communal areas
What concrete bollards cost in Bexley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£375 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£505 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £455–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Bexley
In Bexley, work on adopted pavements and verges needs consent from Bexley Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
If your site in Bexley is listed or inside a conservation area, check with the local planning authority (Bexley Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians pass, checking against Inclusive Mobility guidance.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
How the job runs
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Choosing the right spec
| Option | Detail |
|---|---|
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
| Precast concrete | Grey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
What affects the quote
When we price concrete bollards in Bexley, these make the biggest difference:
- Reinstatement of paving or turf
- Number of bollards
- Precast concrete or reconstituted stone
Looking after them
Small chips can be repaired with a colour-matched mortar, but a bollard that has cracked through or sheared at the dowel needs replacing. Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean.
If posts in Bexley are later hit or damaged, we can repair or replace them — see bollard repairs.
Concrete bollards in Bexley: FAQs
Which parts of Bexley do you cover for concrete bollards?
We cover all of Bexley (DA5, DA7, DA6, DA16, DA8 and DA17) and the rest of London. We also work in Dartford, Greenwich and Swanley.
Do I need consent for concrete bollards on a public footway in Bexley?
In Bexley, work on adopted pavements and verges needs consent from Bexley Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
How much do concrete bollards cost in Bexley?
In Bexley, typically £185–£635 per bollard, supplied and installed, plus VAT, with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How heavy are concrete bollards?
Often well over a hundred kilograms each, and larger designs several times that. The exact weight depends on size and shape. It means they are delivered and set using lifting equipment rather than by hand.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Concrete bollards near Bexley
- Dartford (3.2 mi)
- Greenwich (4.2 mi)
- Swanley (4.6 mi)
- Barking and Dagenham (6.6 mi)
- Lewisham (6.8 mi)
- South Ockendon (6.8 mi)