London · England
Crash-rated bollard installation in City of London
Crash-rated bollards supplied and fitted in City of London, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageCity of London crash-rated bollards
Whether it's estate car parks, places of worship and office entrances, crash-rated bollards in City of London are planned around who needs to get through and who doesn't. The rating only holds when the bollard is installed to the same foundation design that was tested.
We cover every part of City of London in the EC2V, EC2R, EC2Y, EC4N, EC4M and EC4V postcode districts. We also cover neighbouring Islington (2.2 miles), Tower Hamlets (2.5 miles), Westminster (2.6 miles) and Hackney (3 miles) — distances are straight-line.
Local details
- Area
- London, England
- Highway authority
- the City of London Corporation (local roads)
- Planning authority
- The City of London Corporation
- Postcodes
- EC2V, EC2R, EC2Y, EC4N, EC4M, EC4V, EC2M and EC4R
- Guide price
- Typically £2,295–£11,495 per bollard + VAT; minimum job £4,595
- Survey
- Free, with a fixed written quote
- Nearby
- Islington (2.2 mi), Tower Hamlets (2.5 mi), Westminster (2.6 mi), Hackney (3 mi)
What crash-rated bollards cost in City of London
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,295–£6,145 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £5,045–£8,895 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £7,795–£11,495 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; +15% for London. Guide only — the fixed price follows a survey.
Where crash-rated bollards go in around City of London
Common uses in a place like City of London:
- Sites where a vehicle dynamics assessment shows a long straight run-up
- Pedestrianised streets, plazas and crowded public spaces
- Stadiums, arenas and event venues with predictable crowd flows
Before we dig in City of London
the City of London Corporation is the highway authority covering City of London's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in City of London need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at The City of London Corporation before posts go in.
Made ground, a high water table or soft clay may need an engineer to confirm the tested design suits the site; any change to depth, width or reinforcement must be agreed in writing by the manufacturer, or the rating may no longer apply. Reinstatement matches paving, tactile surfaces and kerbs.
- Check that the test certificate matches the exact model, configuration and foundation being installed, and keep it with the site records.
- Ask the local planning authority whether consent is needed, particularly in conservation areas or near listed buildings.
Installation, step by step
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Specification choices
| Option | Detail |
|---|---|
| Finishes and visibility bands | Galvanised and powder-coated finishes in RAL colours, with contrasting or reflective bands near the top so the posts are visible to pedestrians and drivers. |
| Decorative covers | Stainless steel, cast or polymer sleeves can be fitted over the steel core to suit a streetscape. Use covers supplied or approved by the manufacturer so the tested product is not altered. |
| Static rated bollards | Fixed posts for permanent lines where vehicles never need to pass. They are a straightforward rated option to install and maintain. |
What moves the price in City of London
Two City of London jobs with the same number of posts can price quite differently. The usual reasons:
- Buried services, diversions and ground investigation
- Covers, finishes and any integrated lighting
- The rating required and the product range that achieves it
Keeping them working
Keep inspection records with the original test certificate so the line's condition can be shown to insurers or a security adviser. Look for cracked surfacing at the base, movement, damaged covers and faded bands.
We can also service, repair or replace existing posts anywhere in City of London.
Common questions
Can you install crash-rated bollards anywhere in City of London?
We cover all of City of London (EC2V, EC2R, EC2Y, EC4N, EC4M and EC4V) and the rest of London. We also work in Islington, Tower Hamlets and Westminster.
Do I need consent for crash-rated bollards on a public footway in City of London?
the City of London Corporation is the highway authority covering City of London's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do crash-rated bollards cost in City of London?
In City of London, typically £2,295–£11,495 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £4,595 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
When can we rely on the new bollards?
Only once the concrete has reached the strength set in the specification. The posts are physically in place as soon as the pour is finished, but the rated performance depends on the foundation, and full design strength is commonly taken at around 28 days. Your adviser may arrange temporary measures to cover the gap.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
Crash-rated bollards in nearby towns
- Islington (2.2 mi)
- Tower Hamlets (2.5 mi)
- Westminster (2.6 mi)
- Hackney (3 mi)
- Camden (3.5 mi)
- Southwark (3.7 mi)